D-Link DES-1228 Product Manual - Page 40
Select QoS Mode, Queue Mechanism - d link default ip
UPC - 790069293504
View all D-Link DES-1228 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
5 Configuration D-Link Web Smart Switch User Manual VoIP (voice-over Internet Protocol), web browsing applications, file server applications or video conferencing. Thus with larger bandwidth, less critical traffic is limited, and therefore excessive bandwidth can be saved. The following figure displays the status of Quality of Service priority levels of each port, higher priority means the traffic from this port will be first handled by the switch. And for packets that are untagged, the switch will assign the priority depending on your configuration. Figure 60 - QoS > 802.1p Default Priority By selecting the DSCP priority, the web pages will changes as seen below: Figure 61 - QoS > DSCP Priority Settings Select QoS Mode: D-Link Smart Switch allows the user to prioritize the traffic based on the 802.1p priority in the VLAN tag or the DSCP (Differentiated Services Code Point) priority in the IP header. Choose one to prioritize the packets. Queue Mechanism: Select Strict Priority, to process the packets with the highest priority. Select WRR (Weighted Round-Robin), to process packets according to the weight of each priority. When a priority level has reached its egress weight, the system will process the packets in the next level even if there are 36