D-Link DES-3526 Reference Manual - Page 38

DES-3526 Layer 2 Fast Ethernet Switch 7 NETWORK MANAGEMENT (SNMP) COMMANDS The network management commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. The DES-3526 supports the Simple Network Management Protocol (SNMP) versions 1, 2c, and 3. You can specify which version of the SNMP you want to use to monitor and control the Switch. The three versions of SNMP vary in the level of security provided between the management station and the network device. The following table lists the security features of the three SNMP versions: SNMP Version Authentication Method Description v1 Community String Community String is used for authentication − NoAuthNoPriv v2c Community String Community String is used for authentication − NoAuthNoPriv v3 Username Username is used for authentication − NoAuthNoPriv v3 MD5 or SHA Authentication is based on the HMAC-MD5 or HMAC-SHA algorithms − AuthNoPriv v3 MD5 DES or SHA DES Authentication is based on the HMAC-MD5 or HMAC-SHA algorithms − AuthPriv. DES 56-bit encryption is added based on the CBC-DES (DES-56) standard Command create snmp user delete snmp user show snmp user create snmp view delete snmp view show snmp view create snmp community delete snmp community show snmp Parameters {encrypted [by_password auth [md5 | sha ] priv [none | des ] | by_key auth [md5 | sha ] priv [none | des ]]} view_type [included | excluded] [all | oid] view [read_only | read_write] 30