D-Link DES-802 User Guide - Page 15

10/100 Fast Ethernet Switch User's Guide Port 2: 10/100Mbps, N-Way UTP/STP Port 2 operates at an user-selectable effective speed of 10 or 100Mbps for half-duplex mode and 20 or 200Mbps for full-duplex mode. It is an N-Way port, so it auto-detects and auto-configures according to the operating standard (10Mbps Ethernet or 100Mbps Fast Ethernet) of connected devices. Port 2 can operate up to 100 meters of Category 3, 4 or 5 shielded twistedpair or unshielded twisted-pair (STP/UTP) cable. Please use crossover cabling unless you are connecting to a straight-through uplink port on a switch or hub. Port 2 uses an RJ-45 connector. Table 1 : Port and Cable Specifications Port Connector 2 - 10BASE-T and 100BASE-TX (NWay) RJ-45 1 - 10BASE-T (and 100BASE-TX, NWay for UTP/STP ONLY) Combo: UTP/STP, BNC, AUI Half/Full Duplex 10/20Mbps and 100/200 Mbps 10/20 Mbps (100/200Mbps and FDX for UTP/STP ONLY) Cable 100m, Category 5 UTP/STP 100m, Category 3, 4, or 5 UTP/STP Overview 5