D-Link DFE-2624X User Guide - Page 58
Default Gateway, Send BOOTP Request Upon Power Up
View all D-Link DFE-2624X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Dual-Speed Stackable Hubs User's Guide be 255.0.0.0 for a Class A network, 255.255.0.0 for a Class B network, and 255.255.255.0 for a Class C network. ♦ Default Gateway. This parameter specifies the IP address for a gateway or a router where frames with destinations outside the current subnet should be sent. If your network is not part of an internetwork, or you do not want the hub to be accessible outside your local network, you can leave this field blank. ♦ Send BOOTP Request Upon Power Up. This parameter determines whether or not the hub should send out a BOOTP request when it is powered up. The BOOTP protocol allows IP addresses, network masks, and default gateways to be assigned from a central BOOTP server; if this option is set to es," the hub will first look for a BOOTP server to provide it with this information before using local settings. DFE-2600 Stackable Hub - TCP/IP Parameters Configuration Menu Interface # Current Setting IP Address: Subnet Mask: Default Gateway: 210.68.85.51 255.255.255.0 210.68.85.126 System Restart Setting IP Address [210.68.85.51 ] Subnet Mask [255.255.255.0 ] Default Gateway [210.68.85.126 ] Send BootP Request Upon Power Up HELP SAVE EXIT The default setting for all TCP/IP variables is 0.0.0.0. 46 Master Hub Setup and Management