D-Link DFE-2624X User Guide - Page 71
Controlling Individual Ports
View all D-Link DFE-2624X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
You can use PREV GROUP and NEXT GROUP to display information about another hub, or you can enter the hub Group ID number directly in the Group ID field. Controlling Individual Ports The Port State Menu, accessible from the Network Monitoring menu, allows you to view the status of individual ports and control their settings. The information displayed includes: ♦ Group ID. This field determines which hub ports are displayed. ♦ Port ID. This field determines which port is displayed. ♦ Connector Type. This field shows the port connector type. ♦ Link Test. This field displays Up if there is a station connected to the port; otherwise, it displays Down. ♦ Link Test State. This field displays Enable if the port link status is to be auto-detected and displayed, otherwise it displays Disable. This variable is user configurable. ♦ Receive Polarity. This field always displays Normal if the hub is operating properly. ♦ Auto Partition. This field displays Yes if the port has been automatically partitioned off from the rest of the network due to excessive errors on the segment. The field displays No for normal operation. ♦ Admin State. This toggle determines whether the port should be enabled or disabled (manually partitioned). Setting the Admin State to Disabled will isolate the port from the rest of the network. This variable is user configurable. Master Hub Setup and Management 59