D-Link DFE-660TX Product Manual - Page 19

A Troubleshooting Troubleshooting the Hardware Installation If you experience any problems with the hardware installation, first ascertain that all network cable connections are firm, that the proper grade of cable is used for the network connection, and that the cable makeup is correct (straight -- without un-needed crossovers in the connector wiring). Check that the supporting hub is power-on and operating normally, and that the hub is properly qualified (under 10Base-T and/or 100Base-TX standards). Troubleshooting the Software Installation You Get the "DFE-660TX PC Card Not Detected" Error You are running Installation Director, and in the Main Menu you have selected Quick Install 16-bit Driver for Dos Netware Client The Quick Install run is then interrupted by an error message which says that the DFE-660TX PC Card is not detected by the system. You have followed the instruction given by the error message, to repeat Step 1 of the Hardware Installation procedure given at the beginning of Chapter 2 of the User's Guide. And you have then rerun Installation Director. And the same error message has come up.