D-Link DGS-1500-28 User Manual - Page 88
Field, Description, Source Port Mask, Destination Port Mask, Apply
View all D-Link DGS-1500-28 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
5 Configuration D-Link Web Smart Switch User Manual Figure 5.111 - Add Access Profile (IPv6 ACL UDP) The Add ACL Profile IPv6 ACL UDP port page contains the following fields: Field Description Source Port Mask Defines the range of source Ports relevant to the ACL rules. (0=ignore, 1=check). For example, to set 0 - 15, set mask of F. Destination Port Mask Defines the range of destination IP addresses, relevant to the ACL rules. (0=ignore, 1=check). For example, to set 0 - 15, set mask of F. Click Add button then the ACL profile is added. NOTE: A combination of one or several filtering masks can be selected simultaneously. The page updates with the relevant field(s). 2) Selecting the field of interest will display the related columns in the lower part of the page. Enter the filtering mask and click Apply when done. A filtering mask is to specify the digit that you want to check. For example, if you want to check a network of 192.168.1.0/24, then you should enter the IP mask as 255.255.255.0. Figure 5.112 - Access Rule List NOTE: You cannot select Payload in a MAC ACL, or L2 Header in IP ACL. 83