D-Link DGS-1500-28P User Manual - Page 102
upload, Jan-2000 01:19:48 %COPY-I-FILECPY: Files Copy - source URL t - 28 firmware download
View all D-Link DGS-1500-28P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
6 Command Line Interface D-Link Web Smart Switch User Manual Description Parameters Restrictions } The download command downloads a firmware, boot, or switch configuration file from a TFTP server. firmware_fromTFTP − Download and install new firmware on the Switch from a TFTP server. cfg_fromTFTP − Download a switch configuration file from a TFTP server. | − The IP or IPv6 address of the TFTP server. − The path filename of the firmware or switch configuration file on the TFTP server. You need to specify the DOS path if the file is not at the root directory of the TFTP server. None. Example usage: To download a firmware file: DGS-1500-28> download firmware_fromTFTP 1.1.1.23 1\dgs_1500-10032.ros 01-Jan-2000 01:19:48 %COPY-I-FILECPY: Files Copy - source URL tftp://1.1.1.23 /1\ dgs_1500-10032.ros destination URL Unit all flash://image 01-Jan-2000 01:22:49 %COPY-W-TRAP: The copy operation was completed successfully ! 3920460 bytes copied in 00:03:01 [hh:mm:ss] DGS-1500-28> upload Purpose Note: Switch will reboot after restore and all current configurations will be lost. To upload the firmware file or a Switch configuration file to a 97