D-Link DGS-1500-28P User Manual - Page 59
L2 Functions > LLDP > LLDP Management Address Table
View all D-Link DGS-1500-28P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
5 Configuration D-Link Web Smart Switch User Manual Figure 5.60 - L2 Functions > LLDP >LLDP Management Address Settings From Port/To Port: A consecutive group of ports may be configured starting with the selected port. Address Type: Specify the LLDP address type on the port. The value is always IPv4. Address: Specify the address. Port State: Specify whether the Port State is enabled n the port. The possible field values are: Enabled - Enables the port state configured on the port. Disabled - Disables the port state configured on the port. Click Apply to implement changes made. L2 Functions > LLDP > LLDP Management Address Table The LLDP Management Address Table page displays the detailed management address information for the entry. Figure 5.61 - L2 Functions > LLDP >LLDP Management Address Table Management Address: Specifies IPv4 or MAC address then enter the address. Click Search and the table will update and display the values required. Subtype: Displays the managed address subtype. For example, MAC or IPv4. Management Address: Displays the IP address. IF Type: Displays the IF Type. OID: Displays the SNMP OID. Advertising Ports: Displays the advertising ports. L2 Functions > LLDP > LLDP Local Port Table The LLDP Local Port Table page displays LLDP local port information. 54