D-Link DGS-1510-28X User Manual - Page 169
Aggregate Policer, QoS > Advanced Settings > Aggregate Policer
View all D-Link DGS-1510-28X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide VID List SSH, Telnet, and TFTP. Select and enter the VLAN list value that will be matched with the class map here. This value must be between 1 and 4094. Click the Apply button to accept the changes made. Click the Back button to return to the previous window. Aggregate Policer This window is used to view and configure the aggregate policer settings. To view the following window, click QoS > Advanced Settings > Aggregate Policer, as shown below: Figure 7-14 Aggregate Policer window The fields that can be configured are described below: Parameter Aggregate Policer Name Average Rate Normal Burst Size Maximum Burst Size Confirm Action Description Enter the aggregate policer's name here. Enter the average rate value here. This value must be between 0 and 10000000 kbps. Enter the normal burst size value here. This value must be between 0 and 16384 Kbytes. Enter the maximum burst size value here. This value must be between 0 and 16384 Kbytes. Select the confirm action here. The confirm action specifies the action to take on green color packets. If the confirm action is not specified, the default action is to Transmit. Options to choose from are Drop, Set-DSCP-Transmit, Set-1P-Transmit, Transmit, and Set-DSCP-1P. When selecting the Drop option, the packet will be dropped. When selecting the Set-DSCP-Transmit option, enter the IP DSCP value in the space provided. This value sets the IP differentiated services code point (DSCP) value and transmits the packet with the new IP DSCP value. When selecting the Set-1P-Transmit option, enter the 1P transmit value in the space provided. This value sets the 802.1p value and transmits the packet with the new value. When selecting the Set-DSCP-1P option, enter the IP DSCP and 1P transmit values in the spaces provided. When selecting the Transmit option, packets will be transmitted unaltered. 161