D-Link DGS-1510-52X User Manual - Page 200
Protocol ID, Protocol Type, dynamic, Source, Prefix Length, Destination, Prefix, Length, Source Port
View all D-Link DGS-1510-52X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide UDP, ICMP, Protocol ID, ESP, PCP, SCTP, and None. After selecting the TCP option as the Protocol Type, the following section will appear. Figure 8-21 ACL Configuration Wizard (Add Rule for IPv6 ACL) TCP window The dynamic fields that can be configured are described below: Parameter Source Destination Source Port Description Select and enter the source information here. Options to choose from are Any, Host, and IPv6. When the Any option is selected, any source traffic will be evaluated according to the conditions of this rule. When the Host option is selected, enter the source host's IPv6 address here. When the IPv6 option is selected, the Prefix Length option will also be available. Enter the source IPv6 address and prefix length value in the spaces provided. Select and enter the destination information here. Options to choose from are Any, Host, and IPv6. When the Any option is selected, any destination traffic will be evaluated according to the conditions of this rule. When the Host option is selected, enter the destination host's IPv6 address here. When the IPv6 option is selected, the Prefix Length option will also be available. Enter the destination IPv6 address and prefix length value in the spaces provided. Select and enter the source port value here. Options to choose from are and Range. When selecting the = option, the specific selected port number will be used. When selecting the > option, all ports greater than the selected port, will be used. When selecting the < option, all ports smaller than the selected port, will be used. When 192