D-Link DGS-3200-16 User Manual - Page 160
Guest VLAN, Apply, Security > Multiple Authentication > Guest VLAN
UPC - 790069312007
View all D-Link DGS-3200-16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
xStack® DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch can be enabled on a port at the same time. In Any (MAC, 802.1X or WAC/JWAC mode, whether an individual security module is active on a port depends on its system state. As system states of WAC and JWAC are mutually exclusive, only one of them will active on a port at the same time. y 802.1X+IMPB means 802.1X will be verified first, and then IMPB will be verified. Both authentication methods need to be passed. y IMPB+JWAC means IMPB will be verified first, and then JWAC will be verified. Both authentication methods need to be passed. y IMPB+WAC means that IMPB will be verified first, and then WAC will be verified. Both authentication methods need to be passed. Authorized Mode Toggle between Host Based and Port Based. When Port Based is selected, if one of the attached hosts passes the authentication, all hosts on the same port will be granted access to the network. If the user fails the authorization, this port will keep trying the next authentication method. When Host Based is selected, users are authenticated individually. Click Apply to implement the changes made. Guest VLAN Users can assign ports to or remove ports from a guest VLAN. To view the following window, click Security > Multiple Authentication > Guest VLAN: Figure 5 - 60. Guest VLAN window The following fields may be modified to configure Guest VLANs: Parameter Description VLAN Name Click the button and assign a VLAN as a Guest VLAN. The VLAN must be an existing static VLAN. VLAN ID (1-4094) Click the button and assign a VLAN ID for a Guest VLAN. The VLAN must be an existing static VLAN before this VID can be configured. Port List (e.g:1, 6- The list of ports to be configured. Alternatively, tick the All check box to set every port at once. 9) Operation Use the drop-down menu to choose the desired operation: Create VLAN, Add Ports, or Delete Ports. Click Apply to implement the Guest VLAN. Once properly configured, the Guest VLAN and associated ports will be listed in the lower part of the window. 147