D-Link DGS-3630-28SC User Manual 1 - Page 652

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click Monitoring > sFlow > sFlow Poller Settings, as shown below: Figure 13-21 sFlow Poller Settings Window The fields that can be configured are described below: Parameter Unit From Port - To Port Instance Receiver Interval Description Select the Switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Enter the instance index number if multiple samplers are associated with one interface. The valid range is from 1 to 65535. Enter the receiver index value for this poller here. This value must be between 1 and 4. Enter the maximum number of seconds between successive polling samples. This value must be between 0 and 120 seconds. Entering 0 will disable this feature. By default this value is 0. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. Device Environment The device environment feature displays the Switch internal temperature status. 640