D-Link DGS-3630-52TC User Manual - Page 23
PoE Configuration, System > PoE > PoE Status, PoE Status, From Port - To Port, Description
![]() |
View all D-Link DGS-3630-52TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide To view the following window, click System > PoE > PoE Status, as shown below: Figure 3-13 PoE Status Window The fields that can be configured for PoE Status are described below: Parameter From Port - To Port Description Description Select the appropriate port range used for the configuration here. Enter the text that describes the PD connected to a PoE interface. The maximum length is 32 characters. Click the Apply button to accept the changes made. Click the Delete Description button to remove the description from the entry. PoE Configuration This window is used to display and configure the PoE configuration settings. NOTE: If the Switch failed to supply power to the IEEE 802.3at Powered Device (PD), • Check if the PD connected to the port supports the IEEE 802.3at standard • Manually configure the PoE power limit value to 30 Watts for the corresponding port 16
![](/manual_guide/products/dlink-dgs3630-user-manual-7703634/23.png)