D-Link DHP-541 Manual - Page 15
D-Link DHP-541 User Manual, computer's Ethernet Port.
View all D-Link DHP-541 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Section 3 - Configuration Plug the DHP-540 power cord into an electric outlet. Plug the other end of the power cord to the back of the device and then turn on the device by pushing the power switch to the ON position located on the back of the device. Power source is confirmed when the Power LED is illuminated. Click Next to continue. 1. Connect the Ethernet cable from the LAN port to your computer's Ethernet Port. 2. Please ensure that the LED in front of the device is on. Click Next to continue. D-Link DHP-541 User Manual 15
15
D-Link DHP-541 User Manual
Section 3 - Configuration
Plug the DHP-540 power cord into an electric outlet. Plug the
other end of the power cord to the back of the device and
then turn on the device by pushing the power switch to the
ON position located on the back of the device. Power source is
confirmed when the Power LED is illuminated.
Click
Next
to continue
.
1.
Connect the Ethernet cable from the LAN port to your
computer’s Ethernet Port.
2.
Please ensure that the LED in front of the device is on.
Click
Next
to continue.