D-Link DI-624 Product Manual - Page 30
Super G Mode, 11g only mode, CTS Mode, Always, Advanced > Performance continued - support
UPC - 790069251733
View all D-Link DI-624 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Using the Configuration Menu (continued) Advanced > Performance (continued) 802.11g only mode- Select this mode to restrict your network to only those devices that employ the 802.11g standard. Enabling this mode will ensure that you maintain the highest connectivity rate, unhampered by any connection to an 802.11b device. CTS Mode- CTS (Clear To Send) is a function used to minimize collisions among wireless devices on a wireless local area network (LAN). CTS will make sure the wireless network is clear before a wireless client attempts to send wireless data. Enabling CTS will add overhead and may lower wireless throughput. None- CTS is typically used in a pure 802.11g environment. If CTS is set to "None" in a mixed mode environment populated by 802.11b clients, wireless collisions may occur frequently. Always- CTS will always be used to make sure the wireless LAN is clear before sending data. Super G Mode- Disabled- Auto- CTS will monitor the wireless network and automatically decide whether to implement CTS based on the amount of traffic and collisions that occurs on the wireless network. Super G is a group of performance enhancement features that increase end user application throughput in an 802.11g network. Super G is backwards compatible to standard 802.11g devices. For top performance, all wirelss devices on the network should be Super G capable. Select either Disabled, Super G without Turbo, Super G with Dynamic Turbo, or Super G with Standard 802.11g support, no enhanced capabilities. Super G without TurboSuper G with Dynamic Tur- Super G with Static Turbo- Capable of Packet Bursting, FastFrames, Compression, and no Turbo mode. Capable of Packet Bursting, FastFrames, Compression, and Dynamic Turbo. This setting is backwards compatible with nonTurbo (legacy) devices. Dynamic Turbo mode is only enabled when all nodes on the wireless network are Super G with Dynamic Turbo enabled. Capable of Packet Bursting, FastFrames, Compression, and Static Turbo. This setting is not backwards compatible with non-Turbo (legacy) devices. Static turbo mode is always on and is only enabled when all nodes on the wireless network is Super G with Static Turbo enabled. 30