D-Link DI-624M Product Manual

D-Link DI-624M - Wireless 108G MIMO Router Manual

Get D-Link DI-624M - Wireless 108G MIMO Router PDF manuals and user guides
UPC - 790069273957
View all D-Link DI-624M manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DI-624M manual content summary:

  • D-Link DI-624M | Product Manual - Page 1
  • D-Link DI-624M | Product Manual - Page 2
    DI-624M User's Manual Table of Contents Table of Contents Package Contents 4 Minimum System Requirements 4 Introduction 5 Features and Benefits 6 Hardware Overview 7 Connections ...7 LEDs ...8 Wireless Basics 9 Standards-Based Technology 10 Installation Considerations 10 Getting Started
  • D-Link DI-624M | Product Manual - Page 3
    DI-624M User's Manual Table of Contents System ...38 Firmware ...39 Misc...40 Tools ...42 Device Info 42 Log ...44 Log Settings 45 Stats ...46 Wireless ...46 Troubleshooting 47 Technical Specifications 53 Frequently Asked Questions 56 Appendix 90 Securing Your Network 90 Glossary ...91
  • D-Link DI-624M | Product Manual - Page 4
    DI-624M User's Manual Package Contents D-Link DI-624M Super G MIMO Wireless Router CAT-5 Ethernet Cable (All the DI-624M's Ethernet ports are Auto-MDIX) Power Adapter (5.0V, 2.5A) Vertical Stands Mounting Kit CD-ROM with Software and Manual Quick Installation Guide Package Contents Note: Using a
  • D-Link DI-624M | Product Manual - Page 5
    DI-624M User's Manual Introduction Introduction The D-Link DI-624M Super G MIMO Wireless Router is an 802.11g high-performance, wireless router that supports high-speed wireless networking at home, at work or in public places. Unlike most routers, the DI-624M provides data transfers at up to 108
  • D-Link DI-624M | Product Manual - Page 6
    DI-624M User's Manual Features and Benefits Features and Benefits Fully compatible with the 802.11g standard to provide a wireless data rate of up to 108Mbps Backwards compatible with the 802.11b standard to provide a wireless data rate of up to 11Mbps WPA (Wi Fi Protected Access) authorizes and
  • D-Link DI-624M | Product Manual - Page 7
    DI-624M User's Manual Hardware Overview Hardware Overview Connections All Ethernet Ports (WAN and LAN) are auto MDI/MDIX, meaning you can use either a straight-through or a crossover Ethernet cable. Reset Button Pressing the reset button restores the router to its original factory default
  • D-Link DI-624M | Product Manual - Page 8
    DI-624M User's Manual LEDs Hardware Overview WAN LED A solid light indicates connection on the WAN port. This LED blinks during data transmission. WLAN LED A solid light indicates that the wireless segment is ready. This LED blinks during wireless the DI-624M is ready. D-Link Systems, Inc. 8
  • D-Link DI-624M | Product Manual - Page 9
    DI-624M User's Manual Wireless Basics Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. D-Link wireless products will allow you access to
  • D-Link DI-624M | Product Manual - Page 10
    DI-624M User's Manual Wireless Basics Standards-Based Technology The DI-624M Super G MIMO Wireless Router utilizes the 4GHz range. Installation Considerations The D-Link DI-624MSuper G MIMO Wireless Router lets you access your network, using a wireless connection, from virtually anywhere within
  • D-Link DI-624M | Product Manual - Page 11
    DI-624M User's Manual Getting Started Setting up a Wireless Infrastructure Network Getting Started Please remember that D-Link Super G MIMO wireless devices are pre-configured to connect together, right out of the box, with their default settings. For a typical wireless setup at home (as shown
  • D-Link DI-624M | Product Manual - Page 12
    .0.1 Open the Web browser. Type in the IP Address of the Router (http://192.168.0.1). Note: if you have changed the default IP Address assigned to the DI-624M, make sure to enter the correct IP Address. Type admin in the User Name field. Leave the Password blank. Click OK. D-Link Systems, Inc. 12
  • D-Link DI-624M | Product Manual - Page 13
    more information regarding the Setup Wizard. The DI-624M is a Super G MIMO wireless router ideal for home networking and small business networking. The setup wizard will guide you to configure the DI-624M to connect to your ISP (Internet Service Provider). The DI-624M's easy setup will allow you to
  • D-Link DI-624M | Product Manual - Page 14
    DI-624M User's Manual Wireless Using the Configuration Menu SSID: Channel: Super G Mode: Disabled: D-Link Systems, Inc. Home > Wireless Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN).The SSID's factory default setting is default. The SSID
  • D-Link DI-624M | Product Manual - Page 15
    DI-624M User's Manual Super G without Turbo:: Super G with Static Turbo:: Super must share the same SSID (Service Set Identifier) to establish communication. default setting. (Note: If you enable encryption on the DI-624M make sure to also enable encryption on all the wireless clients or wireless
  • D-Link DI-624M | Product Manual - Page 16
    ISP does not give you any IP numbers to use. This option is commonly used for Cable modem services. The Host Name is optional but may be required by some ISPs. The default host name is the device name of the Router and may be changed. The default MAC Address is set to the WAN's physical
  • D-Link DI-624M | Product Manual - Page 17
    DI-624M User's Manual Using the Configuration Menu Clone MAC Address: The default MAC address is set to the WAN's physical interface MAC address on the Broadband Router.You can use the "Clone MAC Address" button to copy the MAC address of the Ethernet Card installed by your ISP and replace the
  • D-Link DI-624M | Product Manual - Page 18
    DI-624M User's Manual Using the Configuration Menu Choose Static IP Address if all WAN IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must
  • D-Link DI-624M | Product Manual - Page 19
    . Your ISP will provide you with a username and password. This option is typically used for DSL services. Select Dynamic PPPoE to obtain an IP address automatically for your PPPoE connection. Select Static PPPoE to use a static IP address for your PPPoeE connection. D-Link Systems, Inc. 19
  • D-Link DI-624M | Product Manual - Page 20
    DI-624M User's Manual Using the Configuration Menu PPPoE: User Name: Retype Password: Service Name: IP Address: Primary DNS Address: Secondary DNS Address: MTU: Auto-reconnect: Choose this option if your ISP uses PPPoE. (Most DSL users will select this option.) Dynamic PPPoE: Receive an IP
  • D-Link DI-624M | Product Manual - Page 21
    interface for the DI-624M. These settings may be referred to as Private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet. IP Address: The IP address of the LAN interface. The default IP address is: 192
  • D-Link DI-624M | Product Manual - Page 22
    settings provided by the DI-624M. The DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool. DHCP Server: Starting IP Address: Ending IP Address: Lease Time: Select
  • D-Link DI-624M | Product Manual - Page 23
    be configured as a virtual server so that remote users accessing Web or FTP services via the public IP address can be automatically redirected to local servers in the LAN (Local Area Network). The DI-624M firewall feature filters out unrecognized packets to protect your LAN network so all computers
  • D-Link DI-624M | Product Manual - Page 24
    DI-624M User's Manual Virtual Server: Name: Private IP: Protocol Type: Private Port: Public Port: Schedule: Example #1: Using the Configuration Menu Select Enabled or Disabled. Enter the name referencing the virtual service. The server computer in the LAN (Local Area Network) that will be providing
  • D-Link DI-624M | Product Manual - Page 25
    DI-624M User's Manual Example #2: Using the Configuration is on LAN computer 192.168.0.30. FTP uses port 21, TCP. Name: FTP Server Private IP: 192.168.0.30 Protocol Type: TCP Private Port: 21 Public Port: 2100 Schedule: From: network. Applications Advanced > Applications D-Link Systems, Inc. 25
  • D-Link DI-624M | Product Manual - Page 26
    applications have difficulties working through NAT (Network Address Translation). Special Applications makes some of these applications work with the DI-624M. If you need to run applications that . Public Type: This is the protocol used to trigger the special application. D-Link Systems, Inc. 26
  • D-Link DI-624M | Product Manual - Page 27
    Area Network) computers from accessing the Internet. The DI-624M can be setup to deny internal computers by their IP or MAC addresses. The DI-624M can also block users from accessing restricted Web sites. IP Filters: Use IP Filters to deny LAN IP addresses from accessing the Internet.You can deny
  • D-Link DI-624M | Product Manual - Page 28
    DI-624M User's Manual MAC Filters Using the Configuration Menu Advanced > Filters > MAC Filters Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from accessing the Network.You can either manually add a MAC address or select the MAC
  • D-Link DI-624M | Product Manual - Page 29
    DI-624M User's Manual Parental Control URL Blocking Using the Configuration Menu Advanced > Parental Control > URL Blocking URL Blocking is used to : Select Enabled or Disabled. Keywords: Block URLs which contain keywords listed below. Enter the keywords in this space. D-Link Systems, Inc. 29
  • D-Link DI-624M | Product Manual - Page 30
    DI-624M User's Manual Domain Blocking Using the Configuration Menu Advanced > Parental Control > Domain Blocking Domain Blocking is used to allow or Permitted Domains. Enter the Permitted Domains in this field. Blocked Domains: Enter the Blocked Domains in this field. D-Link Systems, Inc. 30
  • D-Link DI-624M | Product Manual - Page 31
    advanced feature used to deny or allow traffic from passing through the DI-624M. It works in the same way as IP Filters with additional settings. You can create more detailed access rules for the DI-624M. When virtual services are created and enabled, it will also display in Firewall Rules. Firewall
  • D-Link DI-624M | Product Manual - Page 32
    that cannot run Internet applications properly from behind the DI-624M, then you can set the client up for unrestricted Internet access. It allows a computer to be exposed to the Internet. This feature is useful for gaming purposes. Enter the IP address of the internal computer that will be the DMZ
  • D-Link DI-624M | Product Manual - Page 33
    DI-624M User's Manual Performance Using the Configuration Menu Advanced > Performance Note: These features will be available in future firmware releases. TX Rate: Auto is the default selection. Select from the drop down menu. Transmit Power: 100% is the default selection. Select from the drop
  • D-Link DI-624M | Product Manual - Page 34
    DI-624M User's Manual DTIM Interval: Preamble Type: CTS Mode: Using the Configuration Menu (Delivery Traffic Indication Message) 3 is the default data transmission errors) for communication between the wireless router and the roaming wireless network adapters. Note: High network traffic areas
  • D-Link DI-624M | Product Manual - Page 35
    -624M User's Manual Using the Configuration Menu Tools The Advanced tab provides the following options: Admin, Time, System, Firmware, and Misc. Admin Tools > Admin At this page, the DI-624M administrator can change the system password. There are two accounts that can access the Broadband Router
  • D-Link DI-624M | Product Manual - Page 36
    DI-624M User's Manual Administrator: Password: User: Password: Remote Management: IP Address: Port: Example: Using the Configuration Menu admin is the Administrator login name. Enter the password and enter again to confirm. user is the User login name. Enter the password and enter again to confirm
  • D-Link DI-624M | Product Manual - Page 37
    DI-624M User's Manual Time Using the Configuration Menu Time Zone: Default NTP Server: Set the Time: Daylight optional. To manually input the time, enter the values in these fields for the Year, Month, Day, Hour, Minute, and Second. Click Set Time. To select Daylight Saving time manually, select
  • D-Link DI-624M | Product Manual - Page 38
    DI-624M User's Manual System Using the Configuration Menu Browse Tools > System The current system settings can be saved as a file onto the local hard drive. The saved file or any other saved setting file can be loaded back on the Broadband Router. To reload a system settings file, click on
  • D-Link DI-624M | Product Manual - Page 39
    local hard drive and locate the firmware to be used for the update. Please check the D-Link support site for firmware updates at http://support.dlink.com. You can download firmware upgrades to your hard drive from the D-Link support site. Firmware Upgrade: Click on the link in this screen to find
  • D-Link DI-624M | Product Manual - Page 40
    DI-624M User's Manual Misc. Using the Configuration Menu Tools > Misc. D-Link Systems, Inc. 40
  • D-Link DI-624M | Product Manual - Page 41
    static IP address. The DI-624M supports VPN (Virtual Private Network) passthrough for both PPTP (Point-to-Point Tunneling Protocol) and IPSec (IP Security). Once VPN pass-through is enabled, there is no need to open up virtual services. Multiple VPN connections can be made through the DI-624M. This
  • D-Link DI-624M | Product Manual - Page 42
    Wireless. Device Info Status > Device Info This page displays the current information for the DI-624M. It will display the LAN, WAN and MAC address information. If your WAN connection is set up for a Dynamic IP address and use Connect to establish the PPPoE connection. D-Link Systems, Inc. 42
  • D-Link DI-624M | Product Manual - Page 43
    LAN: IP Address: LAN/Private IP Address of the DI-624M Subnet Mask: LAN/Private Subnet Mask of the DI-624M Wireless: MAC Address: Displays the MAC address SSID: Displays the current SSID Channel: Displays the current channel WEP: indicates whether WEP is enabled or disabled D-Link Systems
  • D-Link DI-624M | Product Manual - Page 44
    DI-624M User's Manual Log Using the Configuration Menu Status > Log The Broadband Router keeps a running log of events and activities occurring on the Router. If the device is rebooted, the logs are automatically . Log Settings - Brings up the page to configure the log. D-Link Systems, Inc. 44
  • D-Link DI-624M | Product Manual - Page 45
    DI-624M User's Manual Log Settings Using the Configuration Menu Status > Log > Log Settings Not only does the Broadband Router display the logs of activities and events, it can setup to send these logs to another location. SMTP Server/ IP Address: Email Address: The address of the SMTP server
  • D-Link DI-624M | Product Manual - Page 46
    through the DI-624M on both the WAN and the LAN ports. The traffic counter will reset if the device is rebooted. Wireless Status > Wireless The wireless client table displays a list of current connected wireless clients. This table also displays the connection time and MAC address of the connected
  • D-Link DI-624M | Product Manual - Page 47
    DI-624M User's Manual Troubleshooting Troubleshooting This Chapter provides solutions to problems that can occur during the installation and operation of the DI-624M Wireless Broadband Router. We cover various aspects of the network setup, including the network adapters. Please read the following
  • D-Link DI-624M | Product Manual - Page 48
    , as shown in the illustrations below. default Check that the IP Address assigned to the wireless adapter is within the same IP Address range as the access point and gateway. (Since the DI-624M has an IP Address of 192.168.0.1, wireless adapters must have an IP Address in the same range, e.g., 192
  • D-Link DI-624M | Product Manual - Page 49
    DI-624M User's Manual Troubleshooting 3. Check that the drivers for the network adapters are installed properly. You may be using different network adapters than those you are using. Go to Start > My Computer > Properties. Select the Hardware Tab. Click Device Manager. D-Link Systems, Inc. 49
  • D-Link DI-624M | Product Manual - Page 50
    DI-624M User's Manual Troubleshooting Double-click on Network Adapters. Right-click on D-Link DWL-G650M Super G MIMO Wireless Notebook Adapter. (In this example we use the DWL-G650M; you may be using other network adapters, but the procedure will remain the same.) Select
  • D-Link DI-624M | Product Manual - Page 51
    DI-624M User's Manual Troubleshooting 4. What variables may cause my wireless products to lose reception? D-Link products let you access your network from virtually anywhere you want. However, the positioning of the products within your environment will affect the wireless range. Please refer to
  • D-Link DI-624M | Product Manual - Page 52
    methods for troubleshooting your network, you may choose to Reset the DI-624M to the factory default settings. Remember that D-Link Super G MIMO products network together, out of the box, at the factory default settings. Reset Button To hard-reset the DI-624M to Factory Default Settings, please
  • D-Link DI-624M | Product Manual - Page 53
    DI-624M User's Manual Technical Specifications Technical Specifications Standards IEEE 802.11g IEEE 802.11b IEEE 802.3 IEEE 802.3u VPN Features NAT with VPN Passthrough (Network Address Translation) MAC Filtering IP Filtering URL Filtering Domain Blocking Scheduling Wireless Operating Range
  • D-Link DI-624M | Product Manual - Page 54
    DI-624M User's Manual Technical Specifications LEDs: Power WAN LAN (10/100) WLAN (Wireless Connection) Physical Dimensions: L = 7.56 inches (192mm) W = 4.65 inches (118mm) H = 1.22 inches (31mm) Wireless : 10.8 oz. (0.3kg) Warranty: 1 year Wireless Data Rates* with Automatic Fallback: 108 Mbps 54
  • D-Link DI-624M | Product Manual - Page 55
    DI-624M User's Manual 9 Mbps 6 Mbps 5.5 Mbps 2 Mbps 1 Mbps Receiver Sensitivity: PER, -89dBm 1Mbps BPSK, 8% PER, -92dBm Technical Specifications *Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data throughput will throughput rate. D-Link Systems, Inc. 55
  • D-Link DI-624M | Product Manual - Page 56
    Web based configuration? When entering the IP Address of the DI-624M (192.168.0.1), you are not if possible. If the computer is turned off, the link light may not be on. What type of cable a Straight-through Cable: Computer to Residential Gateway/Router Computer to Normal Port (hub/switch) Access
  • D-Link DI-624M | Product Manual - Page 57
    DI-624M User's Manual Frequently Asked Questions What´s the . Using a pattern other than what is specified in the above diagram could cause connection problems. When to use a crossover cable and when to use a straight-through cable: Computer normal port - Straight-through D-Link Systems, Inc. 57
  • D-Link DI-624M | Product Manual - Page 58
    DI-624M User's Manual Frequently Asked Questions Step 2: Disable any Internet security software running on the computer. Software firewalls like to their defaults. Click to the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. D-Link Systems, Inc
  • D-Link DI-624M | Product Manual - Page 59
    DI-624M User's Manual Nothing should be checked. Click OK. Frequently Asked Questions Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK. Go to the desktop and close any open windows. Step 4: Check your IP Address. Your computer must have an IP
  • D-Link DI-624M | Product Manual - Page 60
    DI-624M User's Manual Frequently Asked Questions The IP Configuration window will appear, displaying your your adapter, it will display your IP Address, subnet mask, and default gateway. Click OK to close the IP Configuration window. How can I find my IP Address in Windows 2000/XP? Click on
  • D-Link DI-624M | Product Manual - Page 61
    to close the command prompt. Make sure you take note of your computer´s Default Gateway IP Address. The Default Gateway is the IP Address of the D-Link router. By default, it should be 192.168.0.1 How can I assign a Static IP Address in Windows 98/Me? From the desktop, right-click on the Network
  • D-Link DI-624M | Product Manual - Page 62
    DI-624M User's Manual Frequently Asked Questions Click Specify an IP Address. Enter in an IP Address that is on the same subnet as the LAN IP Address on your router. Example: If the router´s LAN IP Address is 192.168.0.1, make your IP Address 192.168.0.X where X is between 2-99. Make sure that the
  • D-Link DI-624M | Product Manual - Page 63
    DI-624M User's Manual Frequently Asked Questions Click on the DNS Configuration tab. Click Enable DNS. Type in a Host (can be any word). Under DNS server search order, enter the LAN IP Address of your router (192.168.0.1). Click Add. Click OK twice. When prompted to reboot your computer, click
  • D-Link DI-624M | Product Manual - Page 64
    your IP Address 192.168.0.X where X = 2-99. Make sure that the number you choose is not in use on the network. Set the Default Gateway to be the same as the LAN IP Address of your router (192.168.0.1). Set the Primary DNS to be the same as the LAN IP address of your router (192.168.0.1). D-Link
  • D-Link DI-624M | Product Manual - Page 65
    the computer that was last connected directly to the cable modem. Step 1: Log into the web based configuration by typing in the IP Address of the router (default:192.168.0.1) in your web browser. The username is admin (all lowercase) and the password is blank (nothing). D-Link Systems, Inc. 65
  • D-Link DI-624M | Product Manual - Page 66
    DI-624M User's Manual Frequently Asked Questions Step 2: Click the Home tab and click the WAN button. Dynamic IP Address is the default value, however, if Dynamic IP Address is not selected as the WAN type, select Dynamic IP Address by clicking on the radio button. Click Clone Mac Address. Click
  • D-Link DI-624M | Product Manual - Page 67
    buttons. Static Cable Connection Step 1: Log into the web based configuration by typing in the IP Address of the router (default:192.168.0.1) in your web browser. The username is admin (all lowercase) and the password is blank (nothing). Step 2: Click the Home tab and click the WAN button. Select
  • D-Link DI-624M | Product Manual - Page 68
    the D-Link tech support website at: http://support.dlink.com for the latest firmware upgrade information.) Step 2: Take a paperclip and perform a hard reset. With the unit on, use a paperclip and hold down the reset button on the back of the unit for 10 seconds. Release it and the router will
  • D-Link DI-624M | Product Manual - Page 69
    DI-624M User's Manual Frequently Asked Questions Step 3: After the router stabilizes, open your browser and enter 192.168.0.1 into the address window and hit the Enter key. When the password dialog box appears, enter the username admin and leave the password blank. Click OK. If the password dialog
  • D-Link DI-624M | Product Manual - Page 70
    local network, you will need to open up ports or the router will block the request. Step 1: Open your web browser and enter the IP Address of your D-Link router (192.168.0.1). Enter username (admin) and your password (blank by default). Step 2: Click on Advanced on top and then click Virtual Server
  • D-Link DI-624M | Product Manual - Page 71
    DI-624M User's Manual Frequently Asked Questions Step 3: Check Enabled to activate entry. Step 4: Enter a name for your virtual server entry. Step 5: Next to Private IP, enter the IP Address of the computer on your local network that you want to allow the incoming service to. Step 6: Choose
  • D-Link DI-624M | Product Manual - Page 72
    DI-624M User's Manual 6 What is corrupted but no other company information would be exposed. D-Link, a leading maker of routers, is one company that sells products designed for setting Find the IP address of the computer you want to use as the DMZ host. To find out how to locate the IP Address of the
  • D-Link DI-624M | Product Manual - Page 73
    DI-624M User's Manual Frequently Asked Questions Step 2: Log into the web based configuration of the router by typing in the IP Address of the router (default:192.168.0.1) in your web browser. The username is admin (all lowercase) and the password is blank (nothing) Step 3: Click the Advanced tab
  • D-Link DI-624M | Product Manual - Page 74
    a range of ports on my DI-624M using Firewall rules? Step 1: Access the router's Web configuration by entering the router's IP Address in your Web browser. The default IP Address is 192.168.0.1. Login using your password. The default username is "admin" and the password is blank. If you are having
  • D-Link DI-624M | Product Manual - Page 75
    defined as a service port, and all requests to this port will be redirected to the computer specified by the server IP. For example, DI-624M router? You will need to open 3 ports in the Virtual Server section of your D-Link router. Step 1: Open your web browser and enter the IP Address of the router
  • D-Link DI-624M | Product Manual - Page 76
    DI-624M User's Manual Frequently Asked Questions Step 3: Enter the information as seen below. The Private IP is the IP Address of the computer on your local network that you want to connect to. Step 4: The first entry will read as shown above. Step 5: Click Apply
  • D-Link DI-624M | Product Manual - Page 77
    connections. This is the case when using a Graphical Interface (such as the Java Interface) with the client. Step 1: Open your web browser and enter the IP Address of your router (192.168.0.1). Enter username (admin) and your password (leave blank). D-Link Systems, Inc. 77
  • D-Link DI-624M | Product Manual - Page 78
    DI-624M User's Manual router for SOCOM on my Playstation 2? To allow you to play SOCOM and hear audio, you must download the latest firmware for the router (if needed), enable Game Mode, and open port 6869 to the IP Address of your Playstation. Step 1: Upgrade firmware (follow link above). D-Link
  • D-Link DI-624M | Product Manual - Page 79
    DI-624M User's Manual Frequently Asked Questions Step 2: Open your web browser and enter the IP Address of the router (192.168.0.1). Enter username (admin) and your password (blank by default). Step 3: Click on the Advanced tab and then click on Virtual Server on the left side. socom 192.168.0.
  • D-Link DI-624M | Product Manual - Page 80
    DI-624M User's Manual Frequently Asked Questions Step 2: Click on the Advanced tab and then click Virtual Server on the left side. gamespy1 192.168.0.100 Both 3783 3783 Step 3: You will create 2 entries. Step 4: Click Enabled and enter Settings: NAME - Gamespy1 PRIVATE IP - The IP Address of
  • D-Link DI-624M | Product Manual - Page 81
    DI-624M User's Manual gamespy2 192.168.0.100 Both 6500 6500 Frequently Asked Questions Step 5: Enter 2nd entry: Click Enabled. Enter the following information: NAME - Gamespy2 PRIVATE IP - The IP Address of your computer that you are running Gamespy from. PROTOCOL TYPE - Both PRIVATE PORT - 6500
  • D-Link DI-624M | Product Manual - Page 82
    to configure anything on the router or on the Kazaa software. If you are having problems, please follow steps below: Step 1: Enter the IP Address of your router in a web browser (192.168.0.1). Step 2: Enter your username (admin) and your password (blank by default). Step 3: Click on Advanced and
  • D-Link DI-624M | Product Manual - Page 83
    3. To play a game, you do not have to configure your router. Warcraft 3 (Battlenet) uses port 6112. Step 1: Open your web browser and enter the IP Address of your router (192.168.0.1). Enter username (admin) and your password (leave blank). Step 2: Click on Advanced and then click Virtual Server
  • D-Link DI-624M | Product Manual - Page 84
    DI-624M User's Manual Frequently Asked Questions You will need to change the port information within the Warcraft 3 software NetMeeting with my D-Link Router? Unlike most TCP/IP applications, NetMeeting uses the IP Address of your router (192.168.0.1). Enter username (admin) and your password (
  • D-Link DI-624M | Product Manual - Page 85
    DI-624M User's Manual Frequently Asked Questions Next to Source, select WAN under interface. In the first box, enter an *. Leave the second box empty. Next to Destination, select LAN under interface. Enter the IP Address of the computer you are running iChat from. Leave the second box empty. Under
  • D-Link DI-624M | Product Manual - Page 86
    the IP Address of the computer on your local network that you want to allow the incoming service to. Step 5: Select TCP for Protocol Type. Step 6: Enter 5190 next to Private Port and Public Port. Step 7: Click Always or configure a schedule. Step 8: Click Apply and then Continue. D-Link Systems
  • D-Link DI-624M | Product Manual - Page 87
    DI-624M User's Manual ichat3 192.168.0.100 5190 5190 * Frequently Asked Questions If using Mac OS X Firewall, you may need to temporarily turn off the firewall in the Sharing preference pane on both computers. To use the Mac OS X Firewall, you must open the same ports as in the router: Step 1:
  • D-Link DI-624M | Product Manual - Page 88
    DI-624M User's Manual default state. If you have opened default state, the Mac OS X firewall blocks file transfers using iChat or America Online AIM software a different file sharing service may be used instead service when the firewall is turned on, be sure to click the Firewall tab and select the service
  • D-Link DI-624M | Product Manual - Page 89
    IP Address depletion problem. Basically, each NAT box has a table consisting of pairs of local IP Addresses and globally unique addresses, by which the box can "translate" the local IP Addresses to global address IP network) using one IP Address. D-Link´s broadband routers (ie: DI-624M) support NAT
  • D-Link DI-624M | Product Manual - Page 90
    DI-624M User's Manual Appendix Appendix Securing Your Network 1. Change Admin Password Changing the password to access your new router is the first step in securing your network. This can done through the Wizard or on the Admin Page of the Tools tab. There is no password by default and hackers
  • D-Link DI-624M | Product Manual - Page 91
    DI-624M User's Manual Appendix Glossary A Access Control List - ACL. Database of network devices that are allowed to access resources on the network. Access Point - AP. Device that allows wireless clients to connect to it and access the network Ad-hoc network - Peer-to-Peer network between
  • D-Link DI-624M | Product Manual - Page 92
    DI-624M User's Manual interface. It supports a 32-bit Link layer - The second layer of the OSI model. Controls the movement of data on the physical link of a network Database - Organizes information so that it can be managed updated plain text Default - A IP addresses from a predefined pool of addresses
  • D-Link DI-624M | Product Manual - Page 93
    DNS service - DDNS is provided by companies to allow users with Dynamic IP addresses to obtain a Domain Name that will always by linked to their changing IP address. The IP address is updated by either client software running on a computer or by a router that supports DDNS, whenever the IP address
  • D-Link DI-624M | Product Manual - Page 94
    DI-624M User's Manual data packets being transmitted from one router to another Host - Computer membership to adjacent routers IIS - Internet VPN connections Infrastructure - In terms of a wireless network, this is when wireless Internet Service Provider the network IP - Internet Protocol IP address -
  • D-Link DI-624M | Product Manual - Page 95
    DI-624M User's Manual Appendix IPsec - Internet Protocol Security IPv6 - Internet Protocol Version 6 uses 128-bit addresses and was developed to solve the problem that we face of running our of IP version 4 addresses and authenticating requests for services on a network L Link Systems, Inc. 95
  • D-Link DI-624M | Product Manual - Page 96
    DI-624M User's Manual Appendix N NAT - Network Address Translation allows many private IP addresses to connect to the Internet, or another network, through one IP address NetBEUI - NetBIOS Extended User Interface is a Local Area Network communication protocol. This is an updated version of NetBIOS
  • D-Link DI-624M | Product Manual - Page 97
    DI-624M User's Manual Appendix Q QoS - Quality of Service R RADIUS - Remote Authentication Dial-In User Service allows for remote users to dial into a central server and be authenticated in order to access resources on a network Rendezvous - Apple's version of UPnP, which
  • D-Link DI-624M | Product Manual - Page 98
    a wireless connection Wireless LAN - Connecting to a Local Area Network over one of the 802.11 wireless standards WISP - Wireless Internet Service Provider WLAN - Wireless Local Area Network Y Yagi antenna - A directional antenna used to concentrate wireless signals on a specific location D-Link
  • D-Link DI-624M | Product Manual - Page 99
    DI-624M User's Manual Contacting Technical Support Contacting Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on
  • D-Link DI-624M | Product Manual - Page 100
    DI-624M User's Manual Getting Started Warranty Subject to the terms and conditions set forth herein, D-Link Systems, Inc. ("D-Link") provides this Limited warranty for its product only to the person or entity that originally purchased the product from: · D-Link or its authorized reseller or
  • D-Link DI-624M | Product Manual - Page 101
    DI-624M User's Manual Warranty product is being manual for the product, and normal maintenance; Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; Any hardware, software, firmware or other products or services provided by anyone other than D-Link
  • D-Link DI-624M | Product Manual - Page 102
    DI-624M User's Manual Warranty Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK LINK FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK with the instructions, may
  • D-Link DI-624M | Product Manual - Page 103
    DI-624M User's Manual Warranty FCC Caution: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to eight inches (20 cm) from all persons. This equipment must not be operated in conjunction with any other antenna. D-Link Systems, Inc. 103
  • D-Link DI-624M | Product Manual - Page 104
    DI-624M User's Manual Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. (12/27/04) D-Link Systems, Inc. 104
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104