D-Link DI-704P Manual

D-Link DI-704P Manual

Get D-Link DI-704P PDF manuals and user guides
UPC - 790069238598
View all D-Link DI-704P manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DI-704P manual content summary:

  • D-Link DI-704P | Manual - Page 1
    D-Link DI-704P TM Express Ethernetwork Broadband Router with Print Server Manual Building Networks for People
  • D-Link DI-704P | Manual - Page 2
    and Benefits 5 LEDs ...6 Connections 7 Introduction to Broadband Technology 8 Sample Scenario 10 Network Setup 11 Setup Wizard 12 Using the Configuration Menu 17 Networking Basics 62 Reset 90 Technical Specifications 91 Contacting Technical Support 92 Warranty and Registration 93 2
  • D-Link DI-704P | Manual - Page 3
    ! D-Link DI-704P Express EtherNetworkTM Broadband Router ! Manual, Warranty and Print Server Software on CD ! Quick Installation Guide ! DI-704P will cause damage and void the warranty for this product. System Requirements for Configuration: ! Ethernet-based Cable or DSL Modem ! Computer with Windows
  • D-Link DI-704P | Manual - Page 4
    Introduction Thank you for purchasing DI-704P 4-Port Ethernet Broadband Router. The DI704P is an Ethernet Broadband Router with a built-in 4-port switch. It also features a parallel port to share a printer on the home or office network and includes a print server application for Windows1. As many as
  • D-Link DI-704P | Manual - Page 5
    a parallel port to connect to a centronic printer and includes a Windows-based print server software application, so users on the network can share the printer1. The print server is also capable of TCP/IP printing. ! Ethernet Cable Included - One Ethernet cable is included with the DI-704P to get
  • D-Link DI-704P | Manual - Page 6
    LOCAL NETWORK LEDs LED Power M1 LED M2 LED WAN LOCAL NETWORK LEDs (Ports 1-4) LED Activity A solid light indicates a proper connection to the power supply. Flashes consistently to indicate that the DI-704P is working properly. Solid light indicates that Internet connection has been established
  • D-Link DI-704P | Manual - Page 7
    will damage the unit. Reset button is to reset the device to its factory default settings. Connect to the printer using a parallel cable. This feature is used to share the printer on the network. WAN port is the connection point for your DSL or Cable modem. Lan Ports LAN port is where you would
  • D-Link DI-704P | Manual - Page 8
    data packets using an IP address and not a MAC address. A router will forward data from the Internet to a particular computer on your LAN. The information that makes up the Internet gets moved around using routers. When you click on a link on a wed page, you send a request to a server to show you
  • D-Link DI-704P | Manual - Page 9
    simply takes any data arriving through each port and forwards the data to all other ports. A switch is more sophisticated, in that a switch can determine the port that each piece of data is supposed a network. Some of these issues are discussed in the manual under the Networking Basics section. 9
  • D-Link DI-704P | Manual - Page 10
    .(See the Quick Installation Guide included with the DFE-690TXD.) Connect your printer to the printer port on the DI-704P. Please refer to the quick installation guide for loading the print server software. ** Easily upgrade to a wireless network by adding a wireless Access Point (D-Link DWL-900AP
  • D-Link DI-704P | Manual - Page 11
    of the LAN ports of the router. The complete setup should look like Fig.1 shown above. Power up the devices in sequence. A. Power up the Cable or DSL modem. Wait until the modem has made the connection to your Internet Service Prover's (ISP's) network. Note: Please see the Manual included with your
  • D-Link DI-704P | Manual - Page 12
    Using the Setup Wizard Open your Web browser and type "http://192.168.0.1" into the URL address box. Then press the Enter or Return key. The logon pop-up screen will appear. Type "admin" for the username and leave the password field blank. Click OK Once you have logged in, the Home screen will
  • D-Link DI-704P | Manual - Page 13
    Using the Setup Wizard (continued) You will see the following screens Click Next Set up your new password. You have the option to establish a password. Click Next 13
  • D-Link DI-704P | Manual - Page 14
    the default selection, select the drop down arrow and chose the correct time zone. Click Next Select your Internet Connection. You will be prompted to select the type of Internet connection for your router. If you are unsure of which setting to select, please contact your Internet Service Provider
  • D-Link DI-704P | Manual - Page 15
    the Setup Wizard (continued) If you selected Dynamic IP Address, this screen will appear: (Used mainly for Cable Internet service.) Click the "Clone MAC Address" button to automatically copy the MAC address of the network adapter in your computer. You can also manually type in the MAC address
  • D-Link DI-704P | Manual - Page 16
    over Ethernet), and this option is selected, then this screen will appear: (Used mainly for DSL Internet service.) Please be sure to remove any existing PPPoE client software installed on your computers. Enter in the username and password provided to you by your ISP. Click Next Click Restart 16
  • D-Link DI-704P | Manual - Page 17
    DI-704P default IP Address is shown below: Open the web browser Type in the IP Address of the DI-704P Home > Wizard Note: if you have changed the default IP Address assigned to the DI-704P, make sure to enter the correct IP Address. The factory default User name is "admin" and the default Password
  • D-Link DI-704P | Manual - Page 18
    Using the Configuration Menu (continued) Home > Wizard (continued) The Home>Wizard screen will appear. Please refer to the Quick Installation Guide for more information regarding the Setup Wizard. Clicking Apply will save changes made to the page Clicking Cancel will clear changes made to the page
  • D-Link DI-704P | Manual - Page 19
    from your ISP. Select this option if your ISP does not give you any IP numbers to use. This option is commonly used for Cable modem services. Host Name: The Host Name field is optional but may be required by some ISPs. The host name is the device name of the Broadband Router. 19
  • D-Link DI-704P | Manual - Page 20
    Using the Configuration Menu (continued) Home > WAN (continued) MAC Address: The default MAC address is set to the WAN's physical interface MAC address on the Broadband Router. You can use the "Clone MAC Address" button to copy the MAC address of the Ethernet Card installed by your ISP and replace
  • D-Link DI-704P | Manual - Page 21
    Using the Configuration Menu (continued) Home > WAN > Static IP Address Choose Static IP Address if all WAN IP information is provided to you by your ISP. You will need to enter in the IP Address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered
  • D-Link DI-704P | Manual - Page 22
    start your configuration of the DI-704P Router. Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses PPPoE connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Select Dynamic PPPoE to obtain an IP address automatically
  • D-Link DI-704P | Manual - Page 23
    IP address User Name: Your PPPoE username provided by your ISP Password: Your PPPoE password provided by your ISP Retype Password: Re-enter PPPoE password Service Name: Enter the service name provided by your ISP. (optional) IP Address , the Broadband Router will automatically connect to your
  • D-Link DI-704P | Manual - Page 24
    Using the Configuration Menu (continued) Home > WAN > PPTP Dynamic IP Address for PPTP is a WAN connection used in Europe. My IP Address: Enter in the IP address for the My Subnet Mask: Enter the subnet mask information. Server IP: Enter the Server IP address. By default, its set to 192.168.0.1 24
  • D-Link DI-704P | Manual - Page 25
    Using the Configuration Menu (continued) Home > WAN > PPTP (continued) PPTP Account: Enter in the username for the PPTP account PPTP Password: Enter the password for the PPTP account. Retype in Password to confirm Connection ID: (Optional) enter the Connection ID if required Maximum Idle Time: The
  • D-Link DI-704P | Manual - Page 26
    Using the Configuration Menu (continued) Home > WAN > BigPond Cable Dynamic IP Address for BigPond is a WAN connection used in Australia. Account: Enter in the username for the BigPond account Password: Enter the password for the BigPond account Login Server: (Optional) enter the Login Server name
  • D-Link DI-704P | Manual - Page 27
    interface for the DI-704P. These settings may be referred to as Private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet. IP Address: The IP address of the LAN interface. The default IP address is 192.168
  • D-Link DI-704P | Manual - Page 28
    Using the Configuration Menu (continued) Home > DHCP DHCP stands for Dynamic Host Control Protocol. The DI-704P has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting
  • D-Link DI-704P | Manual - Page 29
    Configuration Menu (continued) Home > DHCP Static DHCP allows computers on the LAN to receive the same DHCP IP address everytime it boots up. You can bind a specific IP address to a specific computer based on the computer's MAC address Starting IP address: The starting IP address for the DHCP server
  • D-Link DI-704P | Manual - Page 30
    Menu (continued) Advanced > Virtual Server The DI-704P can be configured as a virtual server so that remote users accessing Web or FTP services via the public IP address can be automatically redirected to local servers in the LAN (Local Area Network). The DI-704P firewall feature filters out
  • D-Link DI-704P | Manual - Page 31
    Using the Configuration Menu (continued) Advanced > Virtual Server The DI-704P is also capable of port-redirection meaning incoming traffic to a particular port may be redirected to a different port on the server computer. Each virtual services that are created will be listed at the bottom of the
  • D-Link DI-704P | Manual - Page 32
    Using the Configuration Menu (continued) Advanced > Virtual Server Example #2: If you have an FTP server that you wanted Internet users to access by WAN port 2100 and only during the weekends, you would need to enable it as such. FTP server is on LAN computer 192.168.0.30. FTP uses port 21, TCP.
  • D-Link DI-704P | Manual - Page 33
    applications have difficulties working through NAT (Network Address Translation). Special Applications makes some of these applications work with the DI-704P. If you need to run applications that require multiple connections, specify the port normally associated with an application in the Trigger
  • D-Link DI-704P | Manual - Page 34
    the service. If the mechanism of Special Applications fails to make an application work, try using DMZ host instead. Note! Only one PC can use each Special Application tunnel. Enable / Disable: Select to activate the policy. To disable the virtual server feature, select disable. Trigger Port: This
  • D-Link DI-704P | Manual - Page 35
    Using the Configuration Menu (continued) Advanced > IP Filter Use IP (Internet Protocol) filters to allow or deny computers access to the Internet based on their IP address. 35
  • D-Link DI-704P | Manual - Page 36
    it is only a single computer that you want the policy applied to, then enter the IP address of that computer in the Start Source IP and leave the End Source IP blank. Port Ranges: Enter in the port range of the TCP/UDP ports that you want the policy to apply to. If it is only a single
  • D-Link DI-704P | Manual - Page 37
    of the screen, there is a list of MAC addresses from the DHCP client computers connected to the DI-704P. To use them, select one from the drop down list and select an IP number you want to use. Then click the "Copy to" button and the DI704P will fill in the appropriate information to the
  • D-Link DI-704P | Manual - Page 38
    Using the Configuration Menu (continued) Advanced > MAC Filters Disabled MAC Filter: Select this option if you do not want to use MAC filters on your Local Area Network (LAN). Only allow computers with MAC address listed below to access the network: Select this option to allow only computers that
  • D-Link DI-704P | Manual - Page 39
    Using the Configuration Menu (continued) Advanced > URL Blocking Use URL Blocking filters to disallow computer(s) to access Internet with the following URL keywords entered into the list. The URL Blocking filters are useful feature and similar to parental control. Users can enter keywords that may
  • D-Link DI-704P | Manual - Page 40
    Using the Configuration Menu (continued) Advanced > Domain Filter Use Domain filters to allow or deny computers access to specific Internet domains whether it is through www, ftp, snmp, etc. Domain filters apply to wired computers connected to one of the four Ethernet LAN ports to the DI-704P. 40
  • D-Link DI-704P | Manual - Page 41
    Using the Configuration Menu (continued) Advanced > Domain Filter Disabled Domain Filter: Select this option if you do not want to use Domain filters. Allow users to access the following domains and block all other domains: Select this option to allow users to access the specified Internet domains
  • D-Link DI-704P | Manual - Page 42
    Using the Configuration Menu (continued) Advanced > Firewall Firewall Rules is an advance feature used to deny or allow traffic from passing through the Broadband Router. It works in the same way as IP Filters with additional settings. You can create more detailed access rules for the DI-704P. When
  • D-Link DI-704P | Manual - Page 43
    to the administrator of the network. SNMP can be used to monitor traffic and statistics of the DI-704P. The DI704P supports SNMP v1. Enabled or Disabled: Click Enabled to enable SNMP click Disabled to deactivate SNMP. Local: SNMP services will be available on the Local (LAN) network. Remote: SNMP
  • D-Link DI-704P | Manual - Page 44
    the Configuration Menu (continued) Advanced > DDNS DDNS (Dynamic Domain Name System) keeps dynamic IP addresses (e.g., IP addresses assigned by a DHCP capable router or server) linked to a domain name. Users who have a Dynamic DNS account may use this feature on the DI-704P. DDNS: When an IP address
  • D-Link DI-704P | Manual - Page 45
    address to the specified network. Hop: Enter in the amount of hops it will take to the specified network. Enable: Select this option for the specified static route to take effect. Hop Count - in a transmission path, each link is terminated at a network device such as a router or gateway. The number
  • D-Link DI-704P | Manual - Page 46
    Using the Configuration Menu (continued) Advanced > DMZ If you have a computer that cannot run Internet applications properly from behind the DI-704P, then you can allow that computer to have unrestricted Internet access. Enable this feature and enter the IP address of that computer as a DMZ (
  • D-Link DI-704P | Manual - Page 47
    the Configuration Menu (continued) Tools > Admin Admininstrator Settings At this page, the DI-704P administrator can change the system password. There are two accounts that can access the Broadband Router's Web-Management interface. They are admin and user. Admin has read/write access while user has
  • D-Link DI-704P | Manual - Page 48
    is the WAN IP address of the Broadband Router and 8080 is the port used for the Web-Management interface. Tools > Time The system time is the time used by the DI-704P for scheduling services. You can manually set the time or connect to a NTP (Network Time Protocol) server. If an NTP server is set
  • D-Link DI-704P | Manual - Page 49
    saved setting file created by the DI-704P can be uploaded into the unit. To reload a system settings file, click on Browse to search the local hard drive for the file to be used. The device can also be reset back to factory default settings by clicking on the Reset to Default button. Use the restore
  • D-Link DI-704P | Manual - Page 50
    Using the Configuration Menu (continued) Tools > Firmware You can upgrade the firmware by using this tool. First, check the D-Link support site for firmware updates at http://support.dlink.com. Make sure that the firmware you want to use is saved on the local hard drive of your computer. Click on
  • D-Link DI-704P | Manual - Page 51
    Using the Configuration Menu (continued) Tools > Misc 51
  • D-Link DI-704P | Manual - Page 52
    DI-704P when configurations. By default UPnP setting is set to enable. It is recommended to keep UPnP Setting on enable. VPN Pass Through: For users who telecommute or use Virtual Private Network (VPN), you can select PPTP or IPSec to be used with this router. Non-standard FTP port: If an FTP server
  • D-Link DI-704P | Manual - Page 53
    in the Configuration Utility displays the current information for the Broadband Router. It will display the WAN, LAN, and MAC address information. If your WAN connection is set up for Dynamic IP address a Release the PPPoE connection. This page allows you to observe the DI-704P's working status: 53
  • D-Link DI-704P | Manual - Page 54
    of the DI-704P WAN WAN MAC Address: Displays the WAN port MAC/hardware address IP Address: WAN/Public IP Address Subnet Mask: WAN/Public Subnet Mask Gateway: WAN/Public Gateway IP Address Domain Name Server: WAN/Public DNS IP Address PeripheralPrinter: Status of the parallel print server port. 54
  • D-Link DI-704P | Manual - Page 55
    Using the Configuration Menu (continued) Status > Log The Broadband Router keeps a running log of events and activities occurring on the Router. If the device is rebooted, the logs are automatically cleared. You may save the log files under Log Settings. First Page: The first page of
  • D-Link DI-704P | Manual - Page 56
    Log Settings Not only does the Broadband Router display the logs of activities and events, it can be setup to send these logs to another location. E-Mail Alert: The DI-704P can be set up to send the log files to a specific email address. SMTP Server IP: Input the SMTP information information
  • D-Link DI-704P | Manual - Page 57
    Using the Configuration Menu (continued) Help Help This menu displays the complete Help menu. For help at anytime, click on the Help tab in the configuration menu. 57
  • D-Link DI-704P | Manual - Page 58
    Installing the Print Server Software Insert the installation CD-ROM into the CD-ROM drive. The following window will be shown automatically. If it is not, please run "install.exe" on the CD-ROM. Click Install Print Server Software Click Next 58
  • D-Link DI-704P | Manual - Page 59
    Installing the Print Server Software (continued) Select the destination folder. Click Browse to select a destination folder Click Next Click Finish Select the option for restarting the computer. Click OK After rebooting your computer, the software installation procedure is finished.59
  • D-Link DI-704P | Manual - Page 60
    Platforms After you finish the software installation procedure, your computer will be capable of network printing provided by the DI-704P. On a Windows 95/98 platform, open the Printers window in the My Computer menu. Now, you can configure the print server of the DI-704P: Find out the corresponding
  • D-Link DI-704P | Manual - Page 61
    2000/NT Platforms Type in the IP address of the DI-704P. Click OK Click Port The configuration procedure for a Windows 2000/XP platform is similar to that of Windows 95/98 except the screen of printer Properties: Click Configure Port Type in the IP address of the DI704P. Click OK (Note: Screen shots
  • D-Link DI-704P | Manual - Page 62
    Networking Basics Using the Network Setup Wizard in Windows XP In this section you will learn how to establish a network at home or work, using Microsoft Windows XP. Note: Please refer to websites such as http://www.homenethelp.com and http://www.microsoft.com/windows2000 for information about
  • D-Link DI-704P | Manual - Page 63
    Networking Basics Please follow all the instructions in this window: Click Next In the following window, select the best description of your computer. If your computer connects to the internet through a gateway/router, select the second option as shown. Click Next 63
  • D-Link DI-704P | Manual - Page 64
    Networking Basics Enter a Computer description and a Computer name (optional.) Click Next Enter a Workgroup name. All computers on your network should have the same Workgroup name. Click Next 64
  • D-Link DI-704P | Manual - Page 65
    Networking Basics Please wait while the Network Setup Wizard applies the changes. When the changes are complete, click Next. Please wait while the Network Setup Wizard configures the computer. This may take a few minutes. 65
  • D-Link DI-704P | Manual - Page 66
    Networking Basics In the window below, select the option that fits your needs. In this example, Create a Network Setup Disk has been selected. You will run this disk on each of the computers on your network. Click Next. Insert a disk into the Floppy Disk
  • D-Link DI-704P | Manual - Page 67
    Networking Basics Please read the information under Here's how in the screen below. After you complete the Network Setup Wizard you will use the Network Setup Disk to run the Network Setup Wizard once on each of the computers on your network. To continue click Next. 67
  • D-Link DI-704P | Manual - Page 68
    restart the computer. Click Yes to restart the computer. You have completed configuring this computer. Next, you will need to run the Network Setup Disk on all the other computers on your network. After running the Network Setup Disk on all your computers, your new wireless network will be ready to
  • D-Link DI-704P | Manual - Page 69
    the lower left corner of the screen) ! Right-click on My Computer ! Select Properties and click ! Select the Computer Name Tab in the System Properties window. ! You may enter a Com- puter Description if you wish; this field is optional. ! To rename the computer and join a domain, Click Change. 69
  • D-Link DI-704P | Manual - Page 70
    Workgroup name. ! Click OK Checking the IP Address in Windows XP The wireless adapter-equipped computers in your network must be in the same IP Address range (see Getting Started in this manual for a definition of IP Address Range.) To check on the IP Address of the adapter, please do the following
  • D-Link DI-704P | Manual - Page 71
    the IP Address in Windows XP This window will appear. ! Click the Support tab ! Click Close Assigning a Static IP Address in Windows XP/2000 Note: Residential Gateways/Broadband Routers will automatically assign IP Addresses to the computers on the network, using DHCP (Dynamic Host Configuration
  • D-Link DI-704P | Manual - Page 72
    Networking Basics Assigning a Static IP Address in Windows XP/2000 ! Double-click on Network Connections ! Right-click on Local Area Connections ! Double-click on Properties 72
  • D-Link DI-704P | Manual - Page 73
    : 255.255.255.0 Default Gateway: Enter the LAN IP address of the wireless router. (D-Link wireless routers have a LAN IP address of 192.168.0.1) ! Select Use the following DNS server address. Enter the LAN IP address of the Wireless Router. (D-Link wireless routers have a LAN IP address of 192.168
  • D-Link DI-704P | Manual - Page 74
    the Apple Menu and select System Preferences ! Click on Network ! Select Built-in Ethernet in the Show pull-down menu ! Select Using DHCP in the Configure pull-down menu ! Click Apply Now ! The IP Address, Subnet mask, and the Router's IP Address will appear in a few seconds 74
  • D-Link DI-704P | Manual - Page 75
    Point, as shown. Checking the Wireless Connection by Pinging in Windows Me and 98 ! Go to Start > Run > type command. A window similar to this will appear. Type ping xxx.xxx.xxx.xxx where xxx is the IP Address of the Wireless Router or Access Point. A good wireless connection will show four replies
  • D-Link DI-704P | Manual - Page 76
    print server) or share a network printer (a printer connected to your network through a Gateway/Router,) use the Add Printer Wizard. Please follow the directions below: First, make sure that you have run the Network Setup files and folders in the Help and Support Center in Microsoft Windows XP. 76
  • D-Link DI-704P | Manual - Page 77
    Networking Basics Adding a local printer (a printer connected directly to a computer) A printer that is not shared on the network and is connected directly to one computer is called a local printer. If you do not need to share your printer on a network, follow these directions to add the printer to
  • D-Link DI-704P | Manual - Page 78
    (Deselect Automati- ! cally detect and install my Plug and Play printer if it has been selected.) ! Click Next ! Select Use the following port: From the pull-down ! menu select the correct port for your printer (Most computers use the LPT1: port, as shown in the illustration.) ! Click Next 78
  • D-Link DI-704P | Manual - Page 79
    ! Click Next (If the correct driver is not displayed, insert the CD or floppy disk that came with your printer and click Have Disk.) At this screen, you ! can change the name of the printer (optional.) ! Click Next ! Select Yes, to print a test page. A successful printing will confirm that you have
  • D-Link DI-704P | Manual - Page 80
    Networking Basics Adding a local printer This screen gives you information about your printer. Click Finish When the test page has printed, Click OK 80
  • D-Link DI-704P | Manual - Page 81
    will display the printer icon as shown at right. You have successfully added a local printer. Sharing a network printer After you have run the Network Setup Wizard on all the computers on your network, you can run the Add Printer Wizard on all the computers on your network. Please follow these
  • D-Link DI-704P | Manual - Page 82
    Networking Basics Sharing a network printer ! Click on Add a printer ! Click Next ! Select Network Printer ! Click Next 82
  • D-Link DI-704P | Manual - Page 83
    Networking Basics Sharing a network printer ! Select Browse for a printer ! Click Next Select the printer you would like to share ! Click Next ! Click Finish 83
  • D-Link DI-704P | Manual - Page 84
    : ! Remember the printer name Run the Add Printer ! Wizard on all the com- puters on your network Make sure you have ! already run the Network Setup Wizard on all the network computers After you run the Add Printer Wizard on all the computers in the network, you can share the printer
  • D-Link DI-704P | Manual - Page 85
    Networking Basics Sharing an LPR printer To share an LPR printer (using a print server,) you will need a Print Server such as the DP-101P+. Please make sure that you have run the Network Setup Wizard on all the computers on your network. To share an LPR printer, please follow these directions: ! Go
  • D-Link DI-704P | Manual - Page 86
    Networking Basics Sharing an LPR printer ! Select Create a new port ! From the pull-down menu, select Standard TCP/IP Port, as shown. ! Click Next ! Please read the instructions on this screen ! Click Next Enter the Printer IP ! Address and the Port Name, as shown. ! Click Next 86
  • D-Link DI-704P | Manual - Page 87
    Networking Basics Sharing an LPR printer ! In this screen, select Custom ! Click Settings ! Enter the Port Name and the Printer Name or IP Address ! Select LPR ! Enter a Queue Name (if your Print-Server/ Gateway has more than one port, you will need a Queue name.) ! Click OK 87
  • D-Link DI-704P | Manual - Page 88
    This screen will show you information about your printer. ! Click Finish ! Select the printer you are adding from the list of Printers. ! Insert the printer driver disk that came with your printer. ! Click Have Disk If the printer driver is already installed, do the following: ! Select Keep existing
  • D-Link DI-704P | Manual - Page 89
    Printer Wizard on the other computers on your network. ! Click Next ! Select Yes, to print a test page. ! Click Next This screen will display information about your printer. ! Click You must run the Network Setup Wizard on all the computers on your network before you run the Add Printer Wizard.
  • D-Link DI-704P | Manual - Page 90
    Resetting the DI-704P to the Factory Default Settings After you have tried other methods for troubleshooting your network, you may choose to Reset the DI-704P to the factory default settings. To hard-reset the D-Link DI-704P to the Factory Default Settings, please do the following: ! Turn off the DI
  • D-Link DI-704P | Manual - Page 91
    Specifications Standard IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3 NWay Auto-Negotiation VPN Pass Through PPTP L2TP IPSec Ports One WAN Four LAN LEDs Power WAN Local Network - 10/100 Operating Temperature 32oF to 131oF (0oC to 55oC) Humidity 95% maximum (non
  • D-Link DI-704P | Manual - Page 92
    can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through
  • D-Link DI-704P | Manual - Page 93
    addresses with an APO or FPO. Limited Warranty: D-Link warrants that the hardware portion of the D-Link Link's sole discretion. Such repair or replacement will be rendered by D-Link at an Authorized D-Link Service of the license granted by D-Link for the Software. Software will be warranted for the
  • D-Link DI-704P | Manual - Page 94
    Do not include any manuals or accessories in the shipping package. D-Link will only replace the software, firmware or other products or services provided by anyone other than DLink; Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link
  • D-Link DI-704P | Manual - Page 95
    DLINK'S PRODUCT IS CONNECTED WITH, LOSS OF INFORMATION OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK FOR WARRANTY SERVICE the instructions, may and on, the user is encouraged to Link office. Register your D-Link product online at http://support.dlink.com/ register/
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
Manual
D-Link DI-704P
Building Networks for People
Express Ethernetwork
TM
Broadband Router with Print Server