D-Link DIR-615 Product Manual - Page 18
Pptp - ip address
UPC - 790069302299
View all D-Link DIR-615 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Section 3 - Configuration Internet Setup PPTP Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Address Mode: Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic. PPTP IP Address: Enter the IP address (Static PPTP only). PPTP Subnet Enter the Primary and Secondary DNS Server Addresses (Static Mask: PPTP only). PPTP Gateway: Enter the Gateway IP Address provided by your ISP. DNS Servers: The DNS server information will be supplied by your ISP (Internet Service Provider.) PPTP Server IP: Enter the Server IP provided by your ISP (optional). Account: Enter your PPTP account (username). Password: Enter your PPTP password and then retype the password in the next box. Maximum Idle Enter a maximum idle time during which the Internet connection is Time: maintained during inactivity. To disable this feature, enable Autoreconnect. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1400 is the default MTU. Connect Mode: Select either Always-on, On-Demand, or Manual. D-Link DIR-615 User Manual 18