D-Link DIR-878 User Manual - Page 33
Point-to-Point-Tunneling Protocol if your Internet Service Provider ISP uses a PPTP connection. Your
View all D-Link DIR-878 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Section 3 - Configuration PPTP Choose PPTP (Point-to-Point-Tunneling Protocol) if your Internet Service Provider (ISP) uses a PPTP connection. Your Internet service provider (ISP) can provide you with a username and password. PPTP Server IP Enter the PPTP Server IP Address provided by your ISP. Address: Username: Enter the Username provided by your ISP. Password: Enter the Password provided by your ISP. Reconnect Select either Always on, On demand, or Manual. Mode: Maximum Idle Enter a maximum idle time during which the Internet connection Time: is maintained during inactivity. To disable this feature, enable Autoreconnect. Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP. PPTP IP Enter the PPTP IP Address provided by your ISP (for Static IP only). Address: PPTP Subnet Enter the PPTP Subnet Mask provided by your ISP (for Static IP only). Mask: PPTP Gateway Enter the PPTP Gateway IP Address provided by your ISP (for Static IP Address: IP only). Primary DNS Enter the Primary DNS Server IP address assigned by your ISP. Server: Secondary DNS Enter the Secondary DNS Server IP address assigned by your ISP. Server: D-Link DIR-878 User Manual 29