D-Link DIR-878 User Manual - Page 65
Apply, trash, pencil, Add Route
View all D-Link DIR-878 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Section 3 - Configuration IPv6 If you wish to remove a route, click on its trash can icon in the Delete column. If you wish to edit a route click on its pencil icon in the Edit column. If you wish to create a new route, click the Add Route button. Click Save when you are done. When you click on Add Route, the Create New Route window will open. Enter the required information into the fields described below: Name: Enter a Name for the new rule. DestNetwork: This is the IP address of the router used to reach the specified destination. PrefixLen: Enter the IPv6 address prefix length of the packets that will take this route. Gateway: Enter the IPv6 gateway address. This is the next hop that will be taken if this route is used. Metric: The route metric is a value from 1 to 16 that indicates the cost of using this route. A value 1 is the lowest cost and 15 is the highest cost. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used. Click Apply when you are done. D-Link DIR-878 User Manual 61