D-Link DIS-100E-5W Quick Installation Guide - Page 1

DIS-100E Series Unmanaged Industrial Fast Ethernet Switch Quick Installation Guide Overview The DIS-100E Series Unmanaged Industrial Fast Ethernet Switch solutions are designed for supporting standard industrial applications without complex setup, allowing for a truly plug-and-play network. If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired. Package Checklist Please verify that the box contains the following items: Item Quantity Unmanaged switch 1 Wall-mount plates 2 DIN rail clip 1 M4 Screws (for the wall mount plates & 4 DIN clip) DC power terminal block 1 RJ-45/SFP protective cap 2-4 Quick Installation Guide 1 Safety Instructions When a connector is removed during installation, testing, or servicing, or when an energized fiber is broken, a risk of ocular exposure to optical energy that may be potentially hazardous occurs, depending on the laser output power. The primary hazards of exposure to laser radiation from an optical-fiber communication system are:  Damage to the eye by accidental exposure to a beam emitted by a laser source.  Damage to the eye from viewing a connector attached to a broken fiber or an energized fiber. Documentation Conventions The following conventions are used in this quick installation guide to emphasize information that will be of interest to the reader. DANGER - The described activity or situation might or will cause personal injury. WARNING - The described activity or situation might or will cause equipment damage. CAUTION - The described activity or situation might or will cause service interruption. NOTE - The information supplements the text or highlights important points. Dimension Illustration (unit: mm) 5-Port Model 8-Port Model 1