D-Link DIS-300G-14PSW Quick Installation Guide 1 - Page 6
Console Connection, None Priority
![]() |
View all D-Link DIS-300G-14PSW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Quick Installation Guide Console Connection The Console port is for local management by using a terminal emulator or a computer with terminal emulation software. ● DB9 connector connect to computer COM port ● Baud rate: 115200bps ● 8 data bits, 1 stop bit ● None Priority ● None flow control ● To connect the host PC to the console port, a RJ45 (male) connector-to-RS232 DB9 (female) connector cable is required. The RJ45 connector of the cable is connected to the CID port of the switch; the DB9 connector of the cable is connected to the PC COM port. The pin assignment of the console cable is shown below: NOTE: When connecting to console port, please use the designate console cable attached in the package. 6
![](/manual_guide/products/dlink-dis300g12sw-quick-installation-guide-b838fb3/6.png)
Quick Installation Guide
6
Console Connection
The Console port is for local management by using a terminal emulator or a computer with
terminal emulation software.
●
DB9 connector connect to computer COM port
●
Baud rate: 115200bps
●
8 data bits, 1 stop bit
●
None Priority
●
None flow control
●
To connect the host PC to the console port, a RJ45 (male) connector-to-RS232 DB9 (female)
connector cable is required. The RJ45 connector of the cable is connected to the CID port of the
switch; the DB9 connector of the cable is connected to the PC COM port. The pin assignment of
the console cable is shown below:
NOTE: When connecting to console port, please use the designate console cable attached in the package.