D-Link DNS-345 Manual - Page 19

Section 2 - Getting Started D-Link Storage Utility When first powered on, during the initial boot sequence, the ShareCenter will wait to be assigned an IP address via DHCP. If it does not receive a DHCP assigned IP address, the ShareCenter will be automatically assigned a 169.254.xxx.xxx address. It is recommended that you use the included D-Link Storage Utility software when accessing and configuring the ShareCenter for the first time. If you want to change the IP address before logging in or you are having trouble connecting to the ShareCenter IP address, you can use the Storage Utility software included on the product CD to locate the device on your network and make any necessary changes. Network Storage The D-Link Storage Utility displays any ShareCenter Device: devices it detects on the network here. Refresh: Click Refresh to refresh the device list. Configuration: Click Configuration to access theWeb based configuration of the ShareCenter. LAN: Configure the LAN Settings for the ShareCenter here. Apply: Click Apply to save changes to the LAN Settings. Drive Mapping: Volumes available for mapping are displayed here. Available Drive Choose an available drive letter. Click Connect to map Letters: the selected volume. Click Disconnect to disconnect the selected mapped volume. About: Click About to view the software version of the Easy Search Utility. Exit: Click Exit to close the utility. D-Link ShareCenter DNS-345 User Manual 14