D-Link DNS-345 Manual - Page 67
Enable Auto-Rebuild, Disable Auto-Rebuild
View all D-Link DNS-345 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Section 4 - Configuration Enter the amount of disk space you would like to assign to the second volume for RAID 1 and then check the box next to 'Configure the remaining disk space as JBOD' if you wish to configure the remaining space as JBOD. Click Next to continue. Click Enable Auto-Rebuild to automatically rebuild a failed drive if it has been replaced with a new one. Select Disable Auto-Rebuild if you want to start the rebuild process manually after replacing a failed drive. Click Next to continue. D-Link ShareCenter DNS-345 User Manual 62
62
D-Link ShareCenter DNS-345 User Manual
Section 4 - Configuration
Enter the amount of disk space you would like to assign to
the second volume for RAID 1 and then check the box next
to ‘Configure the remaining disk space as JBOD’ if you wish to
configure the remaining space as JBOD.
Click
Next
to continue.
Click
Enable Auto-Rebuild
to automatically rebuild a failed
drive if it has been replaced with a new one.
Select
Disable Auto-Rebuild
if you want to start the rebuild
process manually after replacing a failed drive.
Click
Next
to continue.