D-Link DPE-301GS Datasheet 1.00 - Page 1

Product Highlights Standards Compliant Supports IEEE 802.3af and 802.3at for interoperability with third party devices Extra Power IEEE 802.3at provides up to 32.4W of power for devices requiring PoE+ Gigabit Speeds 10/100/1000 port will connect with 10Mbps, 100Mbps or 1000Mbps devices Multiple Applications Injector and Splitter can be used individually, or together to provide a complete PoE solution DPE-301GI / DPE-301GS DPE-301GI PoE Injector DPE-301GS PoE Splitter 1-Port Gigabit PoE Injector / 1-Port Gigabit PoE Splitter Features Easy to Use • Plug-and-Play with no software required • Facilitates deployment of PoE devices where power outlets are not available • Reduces installation and network equipment costs by eliminating the need for electrical wiring • Provides power over existing network cabling to PoE devices such as access points, IP cameras, and IP phones • Lightweight, compact and easy to install Gigabit Connectivity • 10/100/1000 interface provides flexibility for all types of connections • Auto-negotiation on Ethernet ports Reliability • Supports 802.3af / 802.3at • Overcurrent protection PoE Injector • Injects PoE on a cable when use of PoE switch is impractical • Delivers power up to 100 meters (328ft) PoE Splitter • Converts incoming power from a PoE switch or injector to low-voltage DC power • Ideal for non-PoE access points, IP cameras and VoIP phones • Supports 5V, 9V and 12V via selectable switch Overview D-Link's DPE-301GI and DPE-301GS are used to provide I.T. Professionals with the benefits of Power over Ethernet (PoE), even when other devices in the network do not support it. With PoE technology, low voltage DC power and Ethernet data signals are combined on a single network cable, which facilitates powering of end devices like IP Cameras, wireless Access Points (APs), and VoIP Phones. This reduces cable clutter, eliminates the need for dedicated electrical outlets on the wall, ceiling, or other unreachable places, reduces installation time, and lowers costs. Both the DPE-301GI and DPE-301GS devices support Gigabit speeds, and can connect to 10Mbps, 100Mbps or 1000Mbps through the RJ-45 interface. These devices also support the IEEE 802.3af and 802.3at PoE/PoE+ standards, which ensures interoperability with other standards-based PoE and PoE+ devices. Small and compact, the DPE-301GI and DPE-301GS are lightweight, have integrated mounting slots, and are easy to install. DPE-301GI Gigabit PoE Injector D-Link's DPE-301GI 1-Port Gigabit Power over Ethernet (PoE) Injector provides a power and data connection to a PoE device over a single network cable. It allows I.T. Professionals to mount their PoE devices virtually anywhere in a building, such as on ceilings or near entryways, and eliminates the need for nearby power outlets and attached power supplies. The DPE-301GI combines electrical power with a Gigabit network connection and produces a Gigabit PoE signal, allowing a single Ethernet cable to carry both data and power to a device. Also known as a "midspan PSE", the DPE-301GI PoE injector can be used when deploying a multi-port PoE switch is impractical or not feasible. It has two