D-Link DPR-1260 Product Manual - Page 25
Network Settings, These are the network settings of your print server. By default - ip address
UPC - 790069283475
View all D-Link DPR-1260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Section 3 - Configuration Network Settings These are the network settings of your print server. By default, the print server is set to DHCP. The IP address of your print server will be automatically assigned by your router or DHCP server. If you are using Windows® 2000 or not using UPnP on your computers, you must set a Static IP address. Network Settings: Select DHCP to get the IP settings automatically from a router or DHCP server on your network. Select Static to assign an IP address to the print server. IP Address: Type the desired IP address of the print server. Subnet Mask: Enter the subnet mask of your network. Default Gateway: Enter the default gateway. This is usually the IP address of your router or gateway. D-Link DPR-1260 User Manual 25