D-Link DPR-1260 Product Manual - Page 27
Ad-Hoc Settings - can t scan
UPC - 790069283475
View all D-Link DPR-1260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Section 3 - Configuration Ad-Hoc Settings Transmission Select the transfer rate based on the speed of your Rate: wireless network. It is strongly recommended to keep this setting to Auto. Super G Mode: Super G is a group of performance enhancement features that increase end user application throughput in an 802.11g network. Super G is backwards compatible to standard 802.11g devices. For top performance, all wireless devices on the network should be Super G capable. Select either Disabled, Super G without Turbo, Super G with Dynamic Turbo. • Disabled - Standard 802.11g support, no enhanced capabilities. • Super G without Turbo - Capable of Packet Bursting, FastFrames, Compression, but no Turbo mode. • Super G with Dynamic Turbo - Capable of Packet Bursting, FastFrames, Compression, and Dynamic Turbo. This setting is backwards compatible with non-Turbo (legacy) devices. Dynamic Turbo mode is only enabled when all devices on the wireless network are Super G with Dynamic Turbo enabled. Wireless Channel: Indicates the channel setting for the DPR-1260. By default the channel is set to 6. The Channel can be changed to fit the channel setting for an existing wireless network or to customize the wireless network. The Auto Channel Scan setting can be selected to allow the DPR-1260 to choose the channel with the least amount of interference. 802.11g Only Enable this mode if your network is made up of purely 802.11g devices. If you have both 802.11b and 802.11g wireless Mode: clients, uncheck the box. Security Mode: See Chapter 4 for security settings. D-Link DPR-1260 User Manual 27