D-Link DSL-502G User Guide - Page 13
Standards Compatibility and Compliance - default ip
View all D-Link DSL-502G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
DSL-502T ADSL Router User's Guide Standards Compatibility and Compliance The DSL-502T complies with or is compatible with the following standards as recognized by their respective agencies. • ITU G.992.2 (G.lite) compliant • ITU-T Rec. I.361 compliant • RFC 791 Internet Protocol compliant • RFC 792 UDP compliant • RFC 826 Address Resolution Protocol compliant (ARP) compliant • RFC 1058 Routing Information Protocol (RIP) compliant • RFC 1213 MIB II for IP compliant • RFC 1334 PPP Authentication Protocol compliant • RFC 1389 Routing Information Protocol 2 (RIP2) compliant • RFC 1483 IP over AAL5/ Bridged Ethernet over AAL5 compliant • RFC 1557 Classical IP over ATM (IPoA) compliant • RFC 1661 Point to Point Protocol (PPP) compliant • RFC 1877 Automatic IP assignment compliant • RFC 1994 Challenge Handshake Authentication Protocol compliant • Supports RFC 2131 and RFC 2132 DHCP functions including: automatic assignment of IP address, use of subnet mask and default gateway and provision of DNS server address for all hosts • RFC 2364 PPP over ATM compliant (PPPoA) compliant • RFC 2516 PPP over Ethernet compliant (PPPoE) compliant • RFC 2684 Bridged/Routed Ethernet over ATM compliant • IEEE 802.3 compliant • IEEE 802.3u compliant • IEEE 802.1d compliant • IEEE 802.11g compliant • IEEE 802.3x compliant • Embedded web server support • Supports Dynamic Learning • Supports Static Routing • Supports NAPT for up to 4096 connections • Supports DHCP for up to 253 hot connections • Supports IGMP • Supports ATM Forum UNI 3.1/4.0 • Supports ATM VCC (Virtual Channel Circuit) for up to eight sessions • Supports TELNET and TFTP • Supports back pressure for half-duplex 3