D-Link DSL-502G User Guide - Page 33

Static IP Address for WAN - manual

Get D-Link DSL-502G PDF manuals and user guides View all D-Link DSL-502G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

DSL-502T ADSL Router User's Guide Static IP Address for WAN When the Router is configured to use Static IP Address assignment for the WAN connection, you must manually assign a global IP Address, Subnet Mask and Gateway IP Address used for the WAN connection. Most users will also to configure DNS server IP settings in the DNS Settings configuration menu (see below). Follow the instruction below to configure the Router to use Static IP Address assignment for the WAN connection. WAN Settings - Static IP 1. Click to select the Static IP Address radio button listed in the WAN Settings options list. The menu will change to offer a different set of configuration options. 2. Under the ATM VC Setting heading, do not change the PVC (Pvc0) index for the initial connection. 3. Also under the ATM VC Setting, you see two numbers, the VCI and VPI values. Do not change the VPI or VCI value unless you have been told to do so. These numbers are used to define a unique path for your connection. If you have been given specific settings for this to configure, type in the correct values assigned by your ISP. 4. Set the Virtual Circuit setting to Enabled in the pull-down menu if it is not already enabled. 5. Select the Connection Type from the pull-down menu under the Static IP heading. Your ISP should provide this information to you. The available options are IPOA, 1483 Bridged VC-Mux, 1483 Bridged LLC, and 1483 Routed VC-Mux. If have not been provided specific information for the Connection Type setting, leave the default setting. 6. Change the IP Address, Subnet Mask, Gateway Address and (if available) Secondary DNS Server IP address as instructed by your ISP. Your ISP should have provided these IP settings to you. 7. Set NAT to Enabled unless you have been told to NAT must be Disabled for your account 8. When you are satisfied that all the WAN settings are configured correctly, click on the Apply button. 9. The new settings must be saved and the Router must be restarted for the settings to go into effect. To Save & Reboot the Router, click on the Tools directory tab and then click the Save & Reboot menu button. In the Save and Reboot menu, click the Reboot button under Force the DSL-502T to system restart. The Router will save the new settings and restart. Upon restarting the Router will automatically establish the WAN connection. 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
DSL-502T ADSL Router User’s Guide
Static IP Address for WAN
When
the
Router
is
configured to use Static IP
Address assignment for the
WAN connection, you must
manually assign a global IP
Address, Subnet Mask and
Gateway IP Address used
for the WAN connection.
Most users will also to
configure DNS server IP
settings in the DNS Settings
configuration
menu
(see
below).
Follow
the
instruction
below
to
configure the Router to use
Static
IP
Address
assignment for the WAN
connection.
WAN Settings - Static IP
1.
Click to select the Static
IP Address
radio button listed in the
WAN Settings
options list.
The menu will change to offer a different set of configuration options.
2.
Under the
ATM VC Setting
heading, do not change the
PVC
(
Pvc0
) index for the initial
connection.
3.
Also under the
ATM VC Setting
, you see two numbers, the
VCI
and
VPI
values. Do not
change the
VPI
or
VCI
value unless you have been told to do so. These numbers are used
to define a unique path for your connection. If you have been given specific settings for
this to configure, type in the correct values assigned by your ISP.
4.
Set the
Virtual Circuit
setting to
Enabled
in the pull-down menu if it is not already
enabled.
5.
Select the
Connection Type
from the pull-down menu under the
Static IP
heading. Your
ISP should provide this information to you. The available options are
IPOA
,
1483 Bridged
VC-Mux, 1483 Bridged LLC,
and
1483 Routed VC-Mux.
If have not been provided specific
information for the Connection Type setting, leave the default setting.
6.
Change the
IP Address
,
Subnet Mask
,
Gateway Address
and (if available)
Secondary
DNS
Server IP address as instructed by your ISP. Your ISP should have provided these IP
settings to you.
7.
Set
NAT
to
Enabled
unless you have been told to NAT must be
Disabled
for your account
8.
When you are satisfied that all the WAN settings are configured correctly, click on the
Apply
button.
9.
The new settings must be saved and the Router must be restarted for the settings to go
into effect. To
Save & Reboot
the Router, click on the
Tools
directory tab and then click
the
Save & Reboot
menu button. In the Save and Reboot menu, click the
Reboot
button
under
Force the DSL-502T to system restart
. The Router will save the new settings and
restart. Upon restarting the Router will automatically establish the WAN connection.
23