D-Link DSM-602H Product Manual - Page 7
Hardware Installation
UPC - 790069263385
View all D-Link DSM-602H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Hardware Installation 1 Connect the power adapter to the connector on the back panel of the DSM-602H/604H. Then plug the other end of the power adapter into a wall outlet or power strip. The Power LED will be ON to indicate proper operation. 2 Connect an Ethernet cable to the Ethernet jack located on the back of the DSM-602H/604H. 3 After the Ethernet cable is securely connected, connect the other end of the Ethernet cable to your network router or switch. 7
7
Connect the power
adapter to the connector
on the back panel of the
DSM-602H/604H. Then
plug the other end of the
power adapter into a wall
outlet or power strip. The
Power LED will be ON to
indicate proper
operation.
Connect an Ethernet
cable to the Ethernet jack
located on the back of the
DSM-
602H/
604H.
After the Ethernet cable
is securely connected,
connect the other end of
the Ethernet cable to your
network router or switch.
Hardware Installation
1
2
3