D-Link DSN-6510 User Manual - Page 22
System Installation and Deployment
View all D-Link DSN-6510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
D-Link Document - User Manual TIP: Install at least one drive in Slot 1 to 4 (marked gray slots). System event logs are saved in these drives. Otherwise, event logs no longer exist after a reboot. System Installation and Deployment Using the following instructions to install and deploy the storage system. 。 Install BBM (Battery Backup Module). The BBM module is located inside the right PSU (PSU2 module). Release the PSU2 latch and move to the back side. PSU2 Latch 。 Release the screws. Connect the BBM into the PSU. CAUTION: Please do not touch the connector pins of the PSU when the BBM is connected. 。 Replace the cover on the PSU, and secure the bracket with screws. Copyright@2014 D-Link System, Inc. All Rights Reserved. 22
D-Link Document – User Manual
TIP:
Install at least one drive in Slot 1 to 4 (marked gray slots). System event logs
are saved in these drives. Otherwise, event logs no longer exist after a reboot.
System Installation and Deployment
Using the following instructions to install and deploy the storage system.
。
Install BBM (Battery Backup Module). The BBM module is located inside the right PSU (PSU2
module). Release the PSU2 latch and move to the back side.
。
Release the screws. Connect the BBM into the PSU.
CAUTION:
Please do not touch the connector pins of the PSU when the BBM is connected.
。
Replace the cover on the PSU, and secure the bracket with screws.
PSU2
Latch
22
Copyright@2014 D-Link System, Inc. All Rights Reserved.