D-Link DSS-200G-10MPP Product Manual - Page 108
Enabling and Disabling PoE, CAUTION, Apply
View all D-Link DSS-200G-10MPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
D-Link DSS-200G MP/MPP series Switch User Manual The device is operational and is powered by PoE and it is activated by PD Alive. Click on the icon to bring up the PD Alive Configuration menu. The port status indicators dictate the speed and status of the link: Port Status Description The link is down. The port is connected at 1 Gbps. The port is connected at 10/100 Mbps. The PoE status is indicated by the power icon on each port: Port Status Description PoE is enabled on the port. PoE is disabled on the port. Enabling and Disabling PoE CAUTION: Before connecting the Powered Device (PD) and enabling 60/90 W PoE, make sure it supports IEEE802.3bt, The power status of each port can be changed by clicking the power icon on each port. The default setting for PoE is on. To change the PoE type, first disable PoE and then re-enable it using the type of PoE required. The following dialogue box will be displayed when disabling PoE on a port: Figure 5-5 PoE Configuration Click the Apply button to accept the changes made. 103