D-Link DV-600S User Manual - Page 71
Retrieving OID of the device, Ensure the device is online to retrieve the OID of the device.
![]() |
UPC - 790069601453
View all D-Link DV-600S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
RETRIEVING OID OF THE DEVICE To identify non D-Link devices, the administrators must first retrieve the OID of the device and then customize them to add to D-View. Ensure the device is online to retrieve the OID of the device. To retrieve the OID of the device: 1. Go to NetTools > MIB Tools > MIB Compiler. The MIB Compiler screen displays. Figure 59: MIB Compiler screen 2. Enter the device IP address. 3. Set the SNMP Configuration. Refer to Setting Up SNMP Configuration to Retrieve Device Information from devices. 4. Compile the RFC1213 MIB File and select sysObjectID from the MIB tree. 5. Right-click sysObjectID and select Info. The Browser Result screen displays. 6. Make a note of the OID value of the device. OR 1. For a non-designated device module, D-View will identify the device as GenSNMPDevice type. 2. Double-click on the device. The graphical interface of the device displays. 3. Go to Device Info and then select System Info. The System InfoGenSNMPDevice Module screen displays.
![](/manual_guide/products/dlink-dv600s-user-manual-3f6f729/71.png)