D-Link DWL-510 Product Manual - Page 10

Getting Started (continued) Setting up a Wireless Ad-Hoc Network DWL-G510 Wireless PCI Adapter with a desktop computer DWL-G510 Wireless PCI Adapter with a desktop computer Install the D-Link DWL-G510 Wireless PCI Adapter into one desktop computer. (See the Quick Installation Guide included with the product for installation instructions.) Install another DWL-G510 into a desktop computer. (See the Quick Installation Guide included with the product.) Set the wireless configuration for the adapters to Ad-Hoc mode, set the adapters to the same channel, and assign an IP address to each computer on the Ad-Hoc network. (See the box below). IP Address When assigning IP addresses to the computers on the network, please remember that the IP address for each computer must be in the same IP address range as all the computers in the network, and the subnet mask must be exactly the same for all the computers in the network. For example: If the first computer is assigned an IP address of 192.168.0.2 with a subnet mask of 255.255.255.0, then the second computer can be assigned an IP address of 192.168.0.3 with a subnet mask of 255.255.255.0, etc. IMPORTANT: If computers or other devices are assigned the same IP address, one or more of the devices may not be visible on the network. 10