D-Link DWL-610 Manual - Page 14
Ad-Hoc Channel, Data Packet Parameter, Profile IP Settings, Launch Utility on Startup, Power Mode,
View all D-Link DWL-610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Using the Configuration Utility (continued) Ad-Hoc Channel: All devices in the Ad Hoc network must be set to the same channel Advanced Profile IP Settings: You can Enable or Disable the IP Settings portion of your profile here. If you select Disable you will need to configure the IP Address information each time you connect to a network. If you select Enable you will maintain the same IP Address information each time you connect to a network. Power Mode: Disable -this default setting consumes the most power Enable - this setting consumes the least power Launch Utility on Startup: Select Enable or Disable Data Packet Parameter: Select the parameters here Fragmentation Threshold: This value should remain at its default setting of 2432. If you experience a high packet error rate, you may slightly increase your Fragmentation Threshold within the value range of 256 to 2432. Setting the Fragmentation Threshold too low may result in poor performance. RTS Threshold: This value should remain at its default setting of 2432. If inconsistent data flow is a problem, only a minor modification should be made. Click Apply if you have made any changes 14