D-Link DWL-G132 Product Manual - Page 19
Frequency, Super G, XR Mode, Launch Utility on Startup, Power Mode, Starting Ad Hoc Network
UPC - 790069286308
View all D-Link DWL-G132 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Using the Configuration Utility (continued) Advanced Frequency: Select 802.11b/g for compatibility with both 802.11b or 802.11g networks, or select 802.11b only. Super G: Selecting Super G mode enables a maximum wireless signal rate of up to 108Mbps.* XR Mode: Enable or Disable range extension mode. Enabling this feature allows you to increase the range of your communication without adding additional hardware. Starting Ad Hoc Network: When using Ad Hoc mode, select the frequency here. Ad Hoc Channel: Select the Ad Hoc channel when in Ad Hoc mode. When communicating in Ad Hoc mode, all devices must share the same channel. Profile IP Settings: You can Enable or Disable the IP Settings portion of your profile here. If you select Disable you will need to configure the IP address information each time you connect to a network. If you select Enable you will maintain the same IP address information each time you connect to a network. Power Mode: Disable -This default setting consumes the most power. Enable - This setting consumes the least power. Launch Utility on Startup: Select Enable or Disable. Click Apply if you have made any changes. *Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data throughput will vary. Network conditions and environmental factors lower actual data throughput rate. 19