D-Link DWL-G520M Product Manual - Page 14
Configuration
UPC - 790069276996
View all D-Link DWL-G520M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
DWL-G520M User's Manual Configuration Using the Configuration Utility SSID (1-3): The Service Set Identifier is the name assigned to the wireless network. The factory SSID setting is default. You can enter up to 3 wireless networks to connect to. Wireless Mode: Select Infrastructure if you want to connect to an access point or wireless router. Ad-Hoc mode is used for peer-to-peer networking. Channel: The channel selection is automatically determined by the DWL-G520M. When in Ad-Hoc mode, you may select a channel manually. The default channel is 6. Ad-Hoc Band: Select 11G or 11B (see Support Band below). Power Mode: Continuous Access Mode is the default setting. For best results leave this setting at the default. Support Band: Select the wireless mode of your wireless network. 11G - Connect to an 802.11g only network. 11B - Connect to an 802.11b only network. Check both to connect to an 802.11b/g mixed network. D-Link Systems, Inc. 14