D-Link DWL-G700AP Product Manual - Page 36

Troubleshooting continued - ip address

Get D-Link DWL-G700AP - AirPlus G Access Point PDF manuals and user guides
UPC - 790069264320
View all D-Link DWL-G700AP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

Troubleshooting (continued) 2. The wireless client cannot access the Internet in the Infrastructure mode. Make sure the wireless client is associated and joined with the correct access point (DWL-G700AP). To check this connection: Right-click on the Local Area Connection icon in the taskbar> select View Available Wireless Networks. The Connect to Wireless Network screen will appear. Please make sure you have selected the correct available network, as shown in the illustrations below. Note: Screen shots were taken using Windows XP. Your screens may differ. Check that the IP address assigned to the wireless adapter is within the same IP address range as the access point and gateway. Since the DWL-700AP has an IP address of 192.168.0.50, wireless adapters must have an IP address in the same range, e.g., 192.168.0.x. Each device must have a unique IP address; no two devices may have the same IP address. The subnet mask must be the same for all the computers on the network. To check the IP address assigned to the wireless adapter, double-click on the Local Area Connection icon in the taskbar > select the Support tab and the IP address will be displayed. (Please refer to Checking the IP Address in the Networking Basics section of this manual.) If it is necessary to assign a static IP address to the wireless adapter, please refer to the appropriate section in Networking Basics. If you are entering a DNS Server address you must also enter the Default Gateway Address. (Remember that if you have a DHCP-capable router, you will not need to assign a static IP address. See Networking Basics: Assigning a Static IP Address.) 36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
36
Troubleshooting (continued)
Make sure the wireless client is associated and joined with the correct access
point (DWL-G700AP). To check this connection:
Right-click
on the
Local Area
Connection icon
in the taskbar> select
View Available Wireless Networks
.
The
Connect to Wireless Network
screen will appear. Please make sure you have
selected the correct available network, as shown in the illustrations below.
2. The wireless client cannot access the Internet in the Infrastructure
mode.
Check that the
IP address
assigned to the wireless adapter is within the same
IP address range
as the access point and gateway.
Since the DWL-700AP has
an IP address of 192.168.0.50, wireless adapters must have an IP address in
the same range, e.g., 192.168.0.x. Each device must have a unique IP address;
no two devices may have the same IP address. The subnet mask must be the
same for all the computers on the network.
To check the
IP address
assigned
to the wireless adapter,
double-click
on the
Local Area Connection icon
in
the taskbar > select the
Support tab
and the
IP address
will be displayed.
(Please refer to
Checking the IP Address
in the
Networking Basics
section
of this manual.)
If it is necessary to assign a
static IP address
to the wireless adapter, please
refer to the appropriate section in
Networking Basics
.
If you are entering a
DNS
Server address
you must also enter the
Default Gateway Address.
(Remember
that if you have a DHCP-capable router, you will not need to assign a static IP
address. See
Networking Basics: Assigning a Static IP Address.
)
Note: Screen shots were
taken using Windows XP. Your
screens may differ.