D-Link DWL-P200 Quick Installation Guide - Page 1

Warning: Please follow the instructions in this guide carefully. Connecting these adapters incorrectly may result in damage to you network devices. DWL-P200 Power Over Ethernet Adapters About Power Over Ethernet. The DWL-P200 Power Over Ethernet (POE) Adapters are designed to supply operational power to a Network Device. These adapters eliminate the need to use an additional AC/DC power supply at the Network Device giving you the ability to mount an Network Device virtually anywhere in a building where power outlets are not available, ( for example in, ceilings, attics). D-Link's DWL-P200 Adapters take advantage of the unused cable pairs within Ethernet Cat 5 cabling. The Base Unit inserts DC voltage into the unused wires therefore allowing the single Category 5 cable to carry both Ethernet data and DC power to an Network Device. The POE Terminal Unit splits the data and DC power apart, which is then supplied to the Network Device. Check Your Package Contents DWL-P200 Base Unit and Terminal Unit Ethernet (CAT5 UTP/Straight Through) Cable Female-to-Female Power Connector 48V DC Power Adapter If any of the above items are missing, please contact your reseller. Using a power supply with a different voltage rating will damage and void the warranty of this product. ©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. 1