D-Link DWS-3227 Product Manual - Page 111
DXS/DWS 3200 Series User Guide, Port Security Settings Learning Mode, Max Entries
UPC - 790069296581
View all D-Link DWS-3227 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
DXS/DWS 3200 Series User Guide - Not in Auto Mode - Indicates that the port control is Forced Authorized, and clients have full port access. - Single-host Lock - Indicates that the port control is Auto and a single client has been authenticated via the port. • Learning Mode - This mode has 2 value options: 'Classic Lock' and 'Limited Dynamic Lock'. Classic Lock immediately lock the port from learning new MAC Addresses. Limited Dynamic Lock - this parameter depends on the 'Max Entries' parameter value • Max Entries - Number of MAC addresses which the port learns until the Limited Dynamic Lock parameter locks it. • Action - Indicates the action to be applied to packets arriving on a locked port. The possible field values are: - Forward - Forwards packets from an unknown source without learning the MAC address. - Discard - Discards packets from any unlearned source. This is the default value. - Shutdown - Discards packets from any unlearned source and shuts down the port. The port remains shut down until reactivated, or until the device is reset. • Trap - Enables traps when a packet is received on a locked port. The possible field values are: - Checked - Enables traps. - Unchecked - Disables traps. • Trap Frequency (Sec) - The amount of time (in seconds) between traps. The default value is 10 seconds. 2. Click . The Port Security Settings Page opens: Figure 60: Port Security Settings Page 3. Modify the fields. 4. Click . The port security settings are defined, and the device is updated. Page 110