D-Link DWS-3227 Product Manual - Page 21
Cable, Port, and Pinout Information, Pin Connections for the 10/100/1000 Ethernet Interface
UPC - 790069296581
View all D-Link DWS-3227 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
DXS/DWS 3200 Series User Guide Table 4: System's LED Indications LED Description LED Indication Amber Off alternating Green and Amber Description An error is occurred at this port There is no error at this port An error is occurred at this port Cable, Port, and Pinout Information This section describes the devices physical interfaces and provides information about cable connections. Stations are connected to the device ports through the physical interface ports on the front panel. For each station, the appropriate mode (Half/Full Duplex, Auto Negotiation) is set. The default is Auto Negotiation. Pin Connections for the 10/100/1000 Ethernet Interface The switching port can connect to stations wired in standard RJ-45 Ethernet station mode using straight cables. Transmission devices connected to each other use crossed cables. The following figure illustrates the pin allocation. Figure 15: RJ-45 Pin Allocation The following table describes the pin allocation: Table 5: RJ-45 Pin Connections for 10/100/1000 Base-TX Pin Use 1 TxRx 1+ 2 TxRx 1- 3 TxRx 2+ 4 TxRx 2- 5 TxRx 3+ 6 TxRx 3- 7 TxRx 4+ 8 TxRx 4- Page 20