D-Link DWS-3227P Product Manual - Page 158
Defining WLAN, Auto Adjust Signal Strength, User's Traffic, Scan for Rogues
![]() |
UPC - 790069289989
View all D-Link DWS-3227P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Defining WLAN Configuring WLAN Radio Settings - Half - Defines half of the maximum power relative to the selected country's device power regulations. - Quarter - Defines a quarter of the maximum power relative to the selected country's device power regulations. - Eighth - Defines an eighth of the maximum power relative to the selected country's device power regulations. - Minimum - Sets the power to the minimum power settings relative to the selected country's device power regulations. • Auto Adjust Signal Strength - Adjusts the transmit power of APs, so the signal strength heard at the sec- ond-closest access point is as close as possible to the target signal-strength configured by the wlan tx-power auto signal-strength global configuration command. Auto Transmit Power can be enabled only when rogue detection is enabled • User's Traffic - Determines if user traffic is enabled for this radio. The possible field values are: - Enable - Enables user traffic on the radio frequency. This is the default value. - Disable- Disables user traffic on the radio frequency. • Scan for Rogues - Indicates the rogue scanning status. The possible field values are: - Enabled - Indicates that rogue scanning is enabled. - Disabled - Indicates that rogue scanning is disabled. 2. Click . The Modify Radio Setting Page opens. 3. Modify the fields. 4. Click . The radio settings are modified, and the device is updated. Page 157
![](/manual_guide/products/dlink-dws3227-product-manual-f9bfd25/158.png)