D-Link DXS-3227P Product Manual - Page 131
Defining VLAN Interface Settings, DXS/DWS 3200 Series User Guide,
UPC - 790069281198
View all D-Link DXS-3227P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
DXS/DWS 3200 Series User Guide Defining VLAN Interface Settings The VLAN Interface Settings Page contains fields for managing ports that are part of a VLAN. The Port Default VLAN ID (PVID) is configured on the VLAN Interface Settings Page. All untagged packets arriving at the device are tagged with the port PVID. To define VLAN interfaces: 1. Click Basic Setup > VLAN > Membership > Interface Settings. The VLAN Interface Settings Page opens. Figure 75: VLAN Interface Settings Page The VLAN Interface Settings Page contains the following fields: • Interface - Displays the port number included in the VLAN. • Interface VLAN Mode - Displays the port mode. The possible values are: - General - Indicates the port belongs to VLANs, and each VLAN is user-defined as tagged or untagged (full IEEE802.1q mode). - Access - Indicates a port belongs to a single untagged VLAN. When a port is in Access mode, the packet types which are accepted on the port cannot be designated. Ingress filtering cannot be enabled or disabled on an access port. - Trunk - Indicates the port belongs to VLANs in which all ports are tagged, except for one port that can be untagged. - Customer - Assigns an interface to a VLAN based on the host source MAC address connected to the interface. • Multicast TV VLAN - indicates the CPE VLAN which is mapped to the Multicast TV VLAN. • PVID - Assigns a VLAN ID to untagged packets. The possible values are 1-4094. VLAN 4095 is defined as per standard and industry practice as the Discard VLAN. Packets classified to the Discard VLAN are dropped. • Frame Type - Specifies the packet type accepted on the port. The possible field values are: - Admit Tag Only - Only tagged packets are accepted on the port. Page 130