D-Link DXS-3227P Product Manual - Page 153
Adding a New Access point, DXS/DWS 3200 Series User Guide, WTP Edit Screen
UPC - 790069281198
View all D-Link DXS-3227P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
DXS/DWS 3200 Series User Guide - Unchecked - Maintains the access points. • Remove - Removes access points. The possible field values are: - Checked - Removes the selected access point. - Unchecked - Maintains the current access points. Adding a New Access point 1. Connect the AP to the switch. The switch discovers the AP. 2. Click . The WTP edit screen opens: Figure 93: WTP Edit Screen The WTP Edit screen contains the following fields: • AP Name - Indicates the AP name (Max. 32 alphanumeric symbols) • Anable AP - Enables/Disables the AP • Key - Indicates the WEP encryption key type, the possible field values are: - ASCII - Indicates the WEP key is in ASCII format. - Hex - Indicates the WEP key is in Hex format. • Tunnel Priority - Used to configure the AP priority for VLAN tunneling. • Tunnel Source Enable - Indicates that AP is enabled as a VLAN source via a tunnel. • Enable WAN - Accommodates certain timing constrains in the communication to a remotely connected AP separated by a WAN link or the Internet. To disable WAN support, use the no form of this command.. 3. Select the Enable AP check box. 4. Select the key type. 5. Click . The AP is activated. The WTP Edit Screen is also used for editing existing APs. Page 152