D-Link DXS-3350SR Product Manual - Page 122
Class, Flowlabel, Source IPv6 Mask, Destination IPv6, Access Rule Table
UPC - 790069267727
View all D-Link DXS-3350SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual Class Checking this field will instruct the Switch to examine the class field of the IPv6 header. This class field is a part of the packet header that is similar to the Type of Service (ToS) or Precedence bits field in IPv4. Flowlabel Checking this field will instruct the Switch to examine the flow label field of the IPv6 header. This flow label field is used by a source to label sequences of packets such as non-default quality of service or real time service packets. Source IPv6 Mask The user may specify an IP address mask for the source IPv6 address by checking the corresponding box and entering the IP address mask. Destination IPv6 Mask The user may specify an IP address mask for the destination IPv6 address by checking the corresponding box and entering the IP address mask. Click Apply to implement changes made. To establish the rule for a previously created Access Profile: To configure the Access Rule for Ethernet, open the Access Profile Table and click Modify for an Ethernet entry. This will open the following screen: Figure 6- 63. Access Rule Table To remove a previously created rule, select it and click the button. To add a new Access Rule, click the Add button: Figure 6- 64. Access Rule Configuration window - Ethernet. To set the Access Rule for Ethernet, adjust the following parameters and click Apply. 107