D-Link DXS-3350SR Product Manual - Page 205
DNS Relay Static Settings, Apply
UPC - 790069267727
View all D-Link DXS-3350SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 205 highlights
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual Parameter DNS State Description This field can be toggled between Disabled and Enabled using the pull-down menu, and is used to enable or disable the DNS Relay service on the Switch. Primary Name Server Allows the entry of the IP address of a primary domain name server (DNS). Secondary Name Server Allows the entry of the IP address of a secondary domain name server (DNS). DNSR Cache Status This can be toggled between Disabled and Enabled. This determines if a DNS cache will be enabled on the Switch. DNSR Static Table State This field can be toggled using the pull-down menu between Disabled and Enabled. This determines if the static DNS table will be used or not. Click Apply to implement changes made. DNS Relay Static Settings To view the DNS Relay Static Settings, click Configuration > Layer 3 IP Networking > DNS Relay > DNS Relay Static Settings, which will open the DNS Relay Static Settings window, as seen below: Figure 6- 154. DNS Relay Static Settings and Table window To add an entry into the DNS Relay Static Table, simply enter a Domain Name with its corresponding IP address and click Add under the Apply heading. A successful entry will be presented in the table below, as shown in the example above. To erase an entry from the table, click the corresponding of the entry to delete. 190