D-Link E15 Quick Install Guide - Page 1

ENGLISH Quick Installation Guide E15 AX1500 Wi-Fi 6 AI Mesh Range Extender PACKAGE CONTENTS • E15 || AX1500 Wi-Fi 6 AI Mesh Range Extender • Ethernet Cable • Quick Installation Guide • Quick Installation Card INSTALLATION OPTION 1 QUICK WPS SETUP 1 Plug the E15 into a power source near your wireless router. Wait for / the Status LED to flash orange. 2 Press the WPS button on your router for 3 seconds. Refer to your / router's manual for router behaviour. 3 Press the WPS button on your E15 for 3 / seconds. The status LED should start to flash white. 4 When the Status LED turns solid white / (may take up to 3 minutes), this indicates that your E15 is connected to your wireless router. Your setup is complete! You can now unplug and move your device to a location between your router and the area where you want wireless coverage. By default, your device will share the same Wi-Fi name and password as your router. IMPORTANT WPS may be disabled on some Routers or Modems. If the WPS Status LED on your Router or Modem does not start blinking when you have pressed the WPS button, try again and hold it a little longer. If it still does not blink, STOP, and configure your E15 using Option 2: D-Link Ai App Setup. OPTION 2 D-LINK AI APP SETUP 1 Download the D-Link Ai app and launch it. / D-Link Ai D-Link Ai 2 Tap Install New Device. Scan the Setup code on the Quick / Installation Card. Follow the on-screen instructions to complete the setup. Quick Installation Card "D-Link Ai " SETUP QR CODE Model Name: DEVICE Wi-Fi Name: dlink-XXXX Password: XXXXXXXX S/N: 123456789