D-Link E15 Quick Install Guide - Page 2

ENGLISH ? FREQUENTLY ASKED QUESTIONS Why can't I connect wirelessly or my wireless connection drops? 1. Verify that your Range Extender is within range of your wireless router. Try plugging it into a location closer to the router and verify the Status LED is solid white. 2. Note that when extending a wireless signal from a router or access point, devices connected to the Range Extender will not get the same speed/throughput as when connected directly to the router. Signal Strength Indicator Weak (1 x White) Good (2 x White) Strong (3 x White) Why can't I access the web-based configuration utility? Verify that http://WXYZ.devicesetup.net/ has been correctly entered into the browser (WXYZ represents the last 4 characters of the MAC address). The Wi-Fi Name/SSID, Wi-Fi Password, and device password are printed on the Quick Installation Card and on the device label. Why can't I access the Internet? Power cycle your Range Extender and check your Internet access again. If you still can not connect to the Internet, check your wireless router. Refer to your wireless router's manual for troubleshooting. What do I do if I forgot my device password or my Wi-Fi Password? 1. If you forgot your password, you must reset your Range Extender. This process will change all your settings back to the factory defaults. 2. Set up your Range Extender using your preferred method. How do I restore the Range Extender to its factory default settings? Locate the reset button. With the Range Extender powered on, use a paper clip to hold the button down until the LED turns solid red. Release the button and the Range Extender will go through its reboot process. Reset Button i GPL CODE STATEMENT This D-Link product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are available to view the full GPL Code Statement at: https://tsd.dlink.com.tw/GPL The GPL code and LGPL code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL code and the LGPL code for this product and the terms of the GPL and LGPL. Written Offer for GPL and LGPL Source Code Where such specific license terms entitle you to the source code of such software, D-Link will provide upon written request via email and/or traditional paper mail the applicable GPL and LGPLsource code files via CD-ROM for a nominal cost to cover shipping and media charges as allowed under the GPL and LGPL. Please direct all inquiries to: Snail Mail: Email: Attn: GPLSOURCE REQUEST [email protected] D-Link Systems, Inc. 14420 Myford Road, Suite 100 Irvine, CA 92606 i FCC WARNING This device is complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) The device may not cause harmful interface, and (2) this device must accept any interface received, including interface that may cause undesired operation. TECHNICAL SUPPORT Having trouble installing your new product? D-Link's website contains the latest user documentation and software updates for D-Link products. Customers can contact D-Link Technical Support through our website by choosing the relevant region. United States Website: http://support.dlink.com Telephone: (877) 453-5465 Canada Website: http://support.dlink.ca Telephone: (800) 361-5265 2021/03/30_90x130 v1.00(US) 4GIDAPX15DLUS1XX