DELPHI SA50000 Installation Guide - Page 2

1 SKYFi Home Kit Set-up Your SKYFi™ Home Kit contains the following components: SKYFi Home Stand 6V A/C power adaptor XM® High-gain Home Antenna Audio cable Figure 1. SKYFi Home Kit components. Set up your SKYFi Home Kit as follows: 1. Connect the ministereo (black connector) end of the supplied audio cable to the jack labeled "LINE OUT" on the back of the SKYFi Home Stand. Connect the red and white connectors to the input jacks on the audio equipment you want to use with SKYFi. Alternatively, you can connect a set of powered speakers directly to the SKYFi Home Stand by plugging the input cable supplied with the speakers directly into the "LINE OUT" jack. 2. Connect the XM Antenna to the jack labeled "ANT" on the back of the SKYFi Home Stand. 3. Connect the power adaptor to the connector labeled "DC IN 6V" on the SKYFi Home Stand. 4. Insert the SKYFi unit into the home stand and press the power button. Caution: Connect only appropriate input devices to the SKYFi Home Stand jacks. Connecting an incorrect input device may damage the system and/or the external electronic device. It is recommended that you use only the A/C power adaptor that came with your SKYFI Home Kit. If you need to use a different adaptor, it must be a 6V, 1000mA DC adaptor and must contain a unified polarity- type jack, identified by the symbol. Note: See SKYFi Operating Guide for important user information